Portable Optical Fiber Identifier
Portable Optical Fiber Identifier

Portable Optical Fiber Identifier

ID: C0230002tek
Category:

Call for Quote

Product Description

Overview

GAOTek portable optical identifier is an easy-to-use device which quickly identifies the direction of transmitted fiber without disrupting the current service. It employs safe and reliable macro bending technology to avoid disruption of network communications that would normally be caused by disconnecting or cutting a fiber optic cable for identification and testing. It recognizes single mode optical fibers with various modulation frequencies at 270 Hz, 1 kHz, and 2 kHz. It provides relative core power display and is available with multiple adapter heads Ø 0.25, Ø 0.9, Ø 2.0 and Ø 3.0 for different optical cables. It is ideal for the maintenance of telecommunication and CATV systems and other fiber optics networks. It can also be used in optical construction and maintenance, live fiber identification, to detect fiber traffic direction and so on.

Features

  • Portable, compact size and easy-to-use
  • Efficiently identify the traffic direction and frequency tone (270 Hz, 1 KHz, 2 KHz) without any damage of the fibers
  • Core Power display of the tested fiber
  • Low bending loss and high efficient output
  • Easy to replace adaptors (Ø 0.25, Ø 0.9, Ø 2.0, Ø 3.0)

Technical Specifications

Identified wavelength range 800 nm-1700 nm
Identified signal type CW, 270 Hz ±5 %,1 kHz ±5 %,2 kHz ±5 %
Detector type Ø1 mm InGaAs 2pcs
Adapter type Ø0.25 (Applicable for Bare Fiber)

Ø0.9 (Applicable for Ø0.9 Cable )

Ø2.0 (Applicable for Ø2.0 Cable )

Ø3.0 (Applicable for Ø3.0 Cable )

Signal direction Left and Right LED
Single Direction Test Range

( CW/0.9mm bare fiber)

-46 dBm~10 dBm (1310 nm)
-50 dBm~10 dBm (1550 nm)
Signal Power Test Range

(CW/0.9 mm bare fiber)

-50 dBm~10 dBm
Signal frequency display 270 Hz, 1 kHz, 2 kHz
Frequency test range ( Average Value)

 

 

Φ0.9,Φ2.0, Φ3.0 -30 dBm~0 dBm (270 Hz,1 KHz)
Φ0.25

 

-25 dBm~0 dBm (2 KHz)
-25 dBm~0 dBm (270 Hz,1 KHz)
-20 dBm~0 dBm (2 KHz)
Insertion Loss (Typical Value) 0.8 dB (1310 nm)
2.5 dB (1550 nm)
Battery 9 V Alkaline Battery
Operating temperature 14 ° F to 140 ° F (-10 °C to + 60 °C)
Storage temperature -13 °F to 158 ° F (-25 °C to  +70 °C)
Dimension 7.7 in × 1.2  in × 1.0 in (196 mm × 30.5 mm × 27 mm)
Weight 0.4 lbs (0.2 Kg)

Additional Information

Function Description

  1. Clamp: Holds the fiber in a suitable location.
  2. Clamp Pushing Button: Push the button up and press downward to fix the adapter head.

Press the button again to loosen the adapter head.

  1. LED indicator: To show the signal direction, modulation and battery

Instructions “How To Use”

  1. Selecting the Adapter– Select the appropriate adapter head according to the type of fiber
  2. Clamp and Loosen
    1. Please insert the fiber into the adapter head and then push the “Clamp Pushing Button” up to clamp the fiber and test it
    2. Please push forward slightly to loosen the adapter head
  3. On/Off
    1. Push up the “Clamp Pushing Button” to turn on the unit
    2. Loosen the “Clamp Pushing Button” to turn off the unit
  4. Optical Fiber Identification
    1. Insert the fiber to the adapter head, push the button up to lock the clamp and cover sunshade
    2. When optical signal passes the fiber, the LED illuminator will indicate the traffic’s direction with intermittently audible tone and the relative core power will be also displayed in digital format
    3. If no optical signal passes the fiber, the LED illuminator is dead and the “LO” will be displayed in the relative core power position.
    4. Fiber identifier can also detect the presence of 2 KHz, 1 KHz and 270 Hz modulated tone with the continuously audible tone
  5. Battery Power Indication
    1. When the LED indicator is green, the battery power is full
    2. When the LED indicator is yellow green, then the power is low but the instrument can still work and test result is still reliable
    3. When the LED indicator is red, the power is too low and the instrument cannot work properly and the battery needs to be replaced
  6. Maintenance
    1. The fiber should be put in the groove according to the specific type
    2. Please use the cotton swabs to clean the detector surface regularly to keep it clean
    3. Please take out the battery when it is not in use for a long period of time

Reviews

There are no reviews yet.

Be the first to review “Portable Optical Fiber Identifier”