CFP Transceivers

GAO’s CFP transceivers are high-speed optical modules used in networking and data center environments to transmit and receive data over fiber optic cables. CFP transceivers support very high data rates and are commonly used for 40 Gigabit Ethernet (40GbE) and 100 Gigabit Ethernet (100GbE) applications. They are hot-pluggable and conform to the CFP MSA (Multi-Source Agreement) standard, ensuring compatibility and interoperability between different vendors equipment. They provide high-density, high-bandwidth connectivity and are suitable for various networking applications.

GAO’s CFP transceivers are composed of an optoelectronic transmitter, optoelectronic receiver, laser driver and trans-impedance amplifier (TIA), digital diagnostic monitoring (DDM) interface, connector interface, and control and identification interface.

The other common names for CFP transceivers, are C Form-Factor Pluggable transceivers, CFP optical modules, C-FP modules, Compact Form-Factor Pluggable transceivers, CFP optics, CFP transceiver modules, CFP optical transceivers, and CFP optical transceiver modules.

Showing 1–24 of 64 results

GAOTek FEC Optical Transceiver

SKU: GAOTek-CT-168
GAOTek FEC optical transceiver for optical communication, with EML technology, DSP-based gearbox, and compliant with IEEE 802.3 cd and QSFP28 MSA standards.
Read more

GAOTek Multi Rate Transceiver

SKU: GAOTek-CT-169
This Multi Rate Transceiver has a wavelength of 1310 nm, data rate of 100 Gb and operating temperature of 32 °F to 167 °F.
Read more

GAOTek All Mode Portable Transceiver

SKU: GAOTek-CT-165
This All Mode Portable Transceiver has a HF multi mode of 50 MHz or 144 MHz or 440 MHz, antenna impedance of 50 Ω and power supply of 13.8 V.
Read more

GAOTek MultiRate Transponder

SKU: GAOTek-CT-163
GAOTek Multi-Rate Transponder supports four QSFP28 client interfaces and one CFP2 line-side interface to support single-channel 400 Gbps large-grain data transfers.
Read more

GAOTek Marine Transceiver

SKU: GAOTek-CT-162
This Marine Transceiver has an operating temperature of 32 °F to 158 °F, frequency range of 1.6 MHz to 27.5 MHz and antenna impedance of 50 Ω.
Read more

GAOTek SFP Optical Transceiver

SKU: GAOTek-CT-164
This SFP Optical Transceiver has a data rate of 400 Gbps, transmitter type of 1271 nm to 1331 nm, Receiver sensitivity of <-7.3 dBm, and a voltage of 3.3 V.
Read more

GAOTek Optical Transceiver Module

SKU: GAOTek-OTM-149
This Optical Transceiver Module has a case temperature of 32 °F to 158 °F, a voltage supply of 3.3 V, a bit rate of 103.1 Gb/s and a wavelength of 1310 nm.
Read more

GAOTek C Band Tunable XFP Transceiver

SKU: GAOTek-TXT-146
This C Band tunable XFP transceiver has a form factor of XFP, data transmission rate of 10 Gbps and operating temperature of 32°F to 158 °F.
Read more

GAOTek Optical Transceiver

SKU: GAOTek-OCT-145
This Optical Transceiver has a max data rate of 40 Gbps, transmitter type of 4 EML, LC Duplex connector, Receiver type of APD and wavelength of 1310 nm.
Read more

GAOTek HPE Transceiver

SKU: GAOTek-HPT-144
This HPE Transceiver has an operating temperature of 32 °F to 158 °F, a wavelength of 850 nm and output power of -8.4 dBm to +2.4 dBm.
Read more

GAOTek XFP BIDI Module

SKU: GAOTek-XBM-143
This XFP BIDI Module has a supply voltage of 3.3 V, wavelength of 1490 nm to 1550 nm, Data rate of 10G, and TX power of -1 dBm to 5 dBm.
Read more

GAOTek LC Transceiver

SKU: GAOTek-LCT-142
GAOTek LC Transceiver from Cisco.
Read more

GAOTek Optic Fiber Transceiver Transmitter

SKU: GAOTek-CT-213
GAOTek optic fiber transceiver transmitter uses digital encoding technology to transmit 16 channels of 3 Gbps HD-SDI video signals bidirectionally over a single-mode optical fiber, covering distances of up to 49.71 mi (80 km) without distortion or relay.
Read more

GAOTek Portable Radio Transceiver

SKU: GAOTek-CT-278
GAOTek portable radio transceiver integrates COFDM modulation, efficient channel coding, and MESH networking protocol to achieve seamless transmission of video, data, audio, and GPS data. It features self-forming, self-healing nodes for rapid deployment, simple installation, and high flexibility.
Read more

GAOTek Mobile Digital Image Transmission

SKU: GAOTek-CT-277
GAOTek mobile digital image transmission is a high-powered RF device designed for NLOS mobile digital image transmission in vehicles.
Read more

GAOTek Network Radio Transceiver

SKU: GAOTek-CT-276
GAOTek network radio transceiver employs COFDM modulation, efficient channel coding, and MESH networking to seamlessly integrate and transmit video, data, audio, and GPS data.
Read more

GAOTek Optical Transceiver

SKU: GAOTek-CT-275
GAOTek optical transceiver consists of three parts: TX module, RX module, and control module.
Read more

GAOTek Receiver for Maritime

SKU: GAOTek-CT-274
GAOTek receiver for maritime is a high-powered RF device specially engineered for non-line-of-sight (NLOS) mobile digital image transmission in vehicles.
Read more

GAOTek Security Transceiver

SKU: GAOTek-CT-273
GAOTek security transceiver is a cutting-edge communication system that employs COFDM multi-carrier modulation and demodulation technology.
Read more

GAOTek UAV Remote Control

SKU: GAOTek-CT-272
GAOTek UAV remote control is a type of high-definition wireless digital video and data transmission device known for its low power consumption and extended communication range.
Read more

GAOTek Optical Network Modules

SKU: GAOTek-CT-271
GAOTek optical network modules provide users with connectivity solutions for 100 Gigabit Ethernet, catering to data center networking, enterprise core aggregation, and service provider transport applications.
Read more

GAOTek Wavemaster Transceiver

SKU: GAOTek-CT-209
GAOTek wavemaster transceiver is engineered for demanding network applications it offers four separate channels for bidirectional data transmission, enhancing network performance.
Read more

GAOTek Duplex Fiber Transceiver

SKU: GAOTek-CT-208
GAOTek duplex fiber transceiver a 10Gbps data rate with a reach of 80 km using dense wavelength division multiplexing (DWDM) technology.
Read more

GAOTek Ultra-Long Range Transceivers

SKU: GAOTek-CT-207
GAOTek ultra-long range transceivers is a versatile and high-performance solution for extending network reach and ensuring reliable long-distance data transmission.
Read more

GAO Tek’s CFP transceivers have the following functions:

  • Data Transmission: GAO’s CFP transceivers are designed to transmit and receive data over optical fibers. They support high-speed communication protocols such as Ethernet, Fiber Channels, and SONET/SDH. CFP modules can handle data rates ranging from 40 Gbps (Gigabits per second) to 400 Gbps, depending on the specific CFP module type.
  • Optical Conversion: Our CFP transceivers convert electrical signals into optical signals for transmission over optical fibers. They incorporate electro-optical components to convert the electrical data signals into light signals suitable for fiber transmission. Conversely, they can also convert incoming optical signals into electrical signals for processing by networking equipment.
  • Hot-Pluggable: GAO’s CFP transceivers are designed to be hot-swappable, meaning they can be inserted or removed from compatible network devices without powering down the system. This feature allows for easy installation, replacement, or reconfiguration of the transceiver modules without disrupting network operations.
  • Form Factor: Our CFP transceivers have a specific form factor that defines their physical dimensions and electrical interface. The CFP form factor provides a high-density, compact module that can be used in various networking equipment, such as switches, routers, and optical transport platforms.

GAO Tek’s CFP transceivers are rugged, versatile, and precision measurement instruments. They comply with applicable industry standards such as IEEE 802.3 Ethernet standards and ITU-T recommendations for optical interfaces.

Our CFP transceivers help our customers comply with relevant U.S. government regulations such as:

  • Federal Communications Commission (FCC) regulations
  • National Institute of Standards and Technology (NIST) guidelines
  • Department of Defense (DoD) requirements and regulations
  • Defense Federal Acquisition Regulation Supplement (DFARS) requirements

Our CFP transceivers help our clients in complying with relevant Canadian government regulations such as:

  • Canadian Radio-television and Telecommunications Commission (CRTC) regulations
  • Innovation, Science and Economic Development Canada (ISED) regulations
  • Canadian Standards Association (CSA) requirements
  • Controlled Goods Program (CGP) compliance

Our CFP transceivers have the following applications:

  • Data Centers: GAO’s CFP transceivers are used in data centers for high-speed interconnectivity between switches, routers, and storage devices.
  • Telecommunications Networks: Our CFP transceivers are used in telecommunications networks, enabling high-speed data transmission over long distances.
  • Metropolitan Area Networks (MANs): GAO’s CFP transceivers are utilized in MANs to establish high-bandwidth connections between different network nodes within a metropolitan area.
  • Wide Area Networks (WANs): Our CFP transceivers facilitate high-capacity data transmission over long-haul optical fiber networks, connecting geographically dispersed locations.
  • High-Performance Computing (HPC): Our CFP transceivers support the networking needs of HPC systems, enabling fast data transfer between compute nodes and storage systems.

Our CFP transceivers can be shipped overnight within the continental U.S. and Canada, and can be shipped globally.