Fiber Fusion Splicers
A wide range of high-quality and well-constructed fiber fusion splicers are available at GAO Tek. The fiber fusion splicers are apparatuses that utilize an electric arc to liquefy two optical strands together at their end countenances, in order to shape a solitary long fiber. The machines join two glass strands end to end so that optical light flags can go from one fiber to the other without issues. Before optical fibers can be joined, they should be carefully stripped of their external coatings and polymer covering. After that, optical fibers are separated into frame smooths, opposite end faces. When this is completed, every fiber is set into a holder in the splicer’s fenced in area. From this point on, the fiber optic fusion splicers take over the rest of the process, which involves 3 steps: alignment, impurity burn-off, and fusion.
Fiber fusion splicers utilize the optical image system which is made out of two high-accuracy video cameras to remove optical fiber pictures and display pictures on the screen. After that, they compute and dissect the picture through the processor CPU and give relative information. At that point, the fusion splicers make minute conformity to fiber positions until they are appropriately adjusted by the data and prompts. During the alignment process, technicians can see the fiber alignment through video cameras. After strands have been legitimately situated, the devices utilize an electronic arc to melt two optical fibers together at their end countenances, to frame a solitary long fiber. The subsequent joint, or fusion splice, for all time, joins the two glass strands end to end so that optical light flags can go from one fiber into the other without losses. Evaluated splice loss tests are then performed.
GAO Tek's fusion splicers have single or simultaneous X and Y views and can automatically complete the entire process of fiber splicing in a few seconds. The reliable and light weight fusion splicers highlight huge colored LCD screens which permit them to work in a confined space and workplace. The high-quality LCD screens also work as battery indicators and notify users when the battery runs low. These high-performance apparatuses offer USB and VGA interfaces which make them convenient for downloading data and updating software. The devices also come with a weather-proofed container which helps users to protect their gadgets from dust and rain.
- GAO Tek’s fiber fusion splicers can be used in industries such as aerospace and defense, broadcast electric utility, fiber optic components and equipment manufacturing, installation and contractors, medical, mining, nuclear, oil and gas, security, service and content providers, and transportation.
- These high-performance devices are also well suited for aerial applications, central office, data center, FTTX , MDUs, metro Ethernet, network infrastructure, security, splicing, and testing, and underwater and subsea.
Showing all 5 results
Fiber Fusion Splicer with Low Splicing Loss (Compact)ID: GAO-FFS-101 Call for Quote
This Fiber Fusion Splicer with Low Splicing Loss (Compact) is designed for fusing single and multimode fibers and causes low splicing loss and is widely used in construction of trunk line and FTTX networks.
Fiber Fusion Splicer with Various Splicing ModesID: GAO-FFS-103 Call for Quote
This Fiber Fusion Splicer with Various Splicing Modes is a lightweight device uses PAS technology and provides a reliable and multifunctional splicing system which greatly enhances the adaptability of the equipment.
GAOTek Fiber Fusion Splicer with PAS Technology (FTTH)ID: GAO-FFS-102 Call for Quote
This Fiber Fusion Splicer with PAS Technology (FTTH) is equipped with PAS (profile alignment system) for precise core-to-core fiber alignment used for consistent low splice loss and accurate loss estimation for FTTH environment.
GAOTek High Precision Fusion Splicer with PAS Tech (3 in 1 Fixture)ID: GAO-FFS-104 Call for Quote
This High Precision Fusion Splicer with PAS Tech (3 in 1 Fixture) is specially designed for the installation, operation and maintenance of optical fiber uses PAS technology for core to core alignment and features a 3 in 1 fixture.
GAOTek Optical Fiber Fusion SplicerID: C0210003tek Call for Quote
This optical fiber fusion splicer is designed for core-core and clad-clad alignment with PAS technology and 3-in-1 combination clamp with X and Y view or single X/Y view, dis-pays SOC available for typical 9 s