30-Channel Fiber Optic Voice Multiplexer, 74.56 mi Range – GAOTek
Multiplex up to 30 POTS channels over fiber with this versatile device, featuring 4 Ethernet, 4 RS232, and 4 E1 ports, plus SNMP management.
Description
Overview
GAOTek 30-Channel Fiber Optic Voice Multiplexer, 74.56 mi Range are 30 channels voice fiber multiplexers that provide a method of multiplexing up to 30 analog (POTS) channels over single pairs of multimode or single-mode fibers. These voice fiber multiplexers solve the problem of limited available fiber, reduce equipment space, and lower overall equipment costs. In addition to voice (POTS), the voice multiplexers also come with 4 x 10 or 100 Base-T Ethernet ports, 4 x RS232 ports, and 4 x E1 ports. All ports operate simultaneously over the fiber optic cable and can be used with leased lines to build private networks and private telephone networks. Their merits include complete warning functions, high integration, low consumption, stable performance, and convenient usage. The 30 voice (FXS or FXO) phones over fiber multiplexers can be managed by SNMP management; users can monitor various devices’ operation status easily.
Features
- Provides 1 to 4 channel E1 G.703 for option
- Provides 1 to 4 channel (liner) Ethernet for option
- Provides 1 to 30 channel POTS (FXO or FXS)
- Provides 1 to 4 channel RS232
- Ethernet port support 10M or 100 M or 10 M or 100 M or 1000 M
- Ethernet port supports AUTO-MDIX
- 1 to 30 channel voice connection supports calling indication.
- Configuration E&M to Fiber convertor point to point
- Voice port supports O port and S port.
- Optical interface supports SC or FC interface and supports single fiber interface.
Technical Specifications
| Optical Interface | Optical wavelength: single mode 1310 nm to 1550 nm or multimode 850 nmFiber: single fiber or double fiber for option
Transmitting consumption: -9 dBm to -5 dBm Transmission range 0 mi to 74.56 mi (0 km to 120 Km) for option Optical interface SC or FC or ST or SFP (optional) Receiving and dispatching module >-6 dBm Optical receiver receiving sensitivity <-36 dBm (BER<10 to 11) Fiber circuit code NRZ code |
| Ethernet interface (Option) | Rate: 10 M or 100 M, full or duplex auto-negotiationProtocol: Support IEEE 802.3, IEEE 802.1Q (VLAN)
MAC Address Entries: 4096 Entries Total Memory Sizes: 64M Bits SDRAM Physical interface: RJ45, support AUTO-MDIX |
| Voice Interface | Alarm voltage: 75 V Alarm frequency: 25 HZ 2-line input impedance: 600 Ω (hanging off) Wastage: 40 dB |
| Alarm detecting voltage: 3 5V Alarm detecting frequency: 17 HZ to 60 HZ 2-line input impedance: 600 Ω (hanging off) Wastage 40 dB |
|
| Max current 22 mA Saturation voltage 3 V Dial speed >20 pps |
|
| Steady current 7 ma min test current 5 ma pluse dial recognition >20 pps |
|
| RS232 Interface (Option) | Rate: 300-115.2Kbps auto-adaptable (Asynchronous) Interface characteristic: satisfies ITU-T V.24 |
| E1 Interface (Option) | standard Conforms to G.703 standard rate N × 64 Kbps, N1 to 32 Vibration characteristic Satisfies G.742 and G.823 standard Transmission capacity 4 x E1 Clock type internal-clock, route clock Connecter 75ohm BNC or 120ohm RJ45 |
| Power Supply | working voltage range wide, good anti-disturb and Isolation, work stableoption I – DC -48 V, range DC-36 V to DC -72C
option II – AC 220 V, range AC 165 V to AC 240 V option III – double power AC+AC, DC+DC or AC+DC Power Consumption <=3 Watts |
| Environment Condition | Operating temperature 32 ℉ to 122 ℉ (0 ℃ to 50 ℃)Storage temperature  -4 ℉ to 158 ℉ (-20 ℃ to 70 ℃)
Relative temperature 95 % (uncondensed) |
| Dimension | 17.05 in x 5.43 in x 1.73 in (433 mm x 138 mm x 44 mm) |