GAOTek 2 Channels Mixed Signal Oscilloscope

This 2 Channels Mixed Signal Oscilloscope has 100 MHz bandwidth, 1 MΩ ±2% input impedance sample rate of 1 GS/s, and a rising time of ≤3.5 ns

GAOTek-MSO-150

Description

Features

  • 16 Channels logic analyzer 
  • 2 Channels oscilloscope and external trigger 
  • Display of 7 in (17.7 cm) color LCD 
  • High resolution of 800 pixels x 480 pixels 
  • 1 GSa/s real time sampling rate 
  • USB host 
  • Support flash memory card storage and USB interface system upgrade 
  • Ultrathin design, handy volume, easily portable 
  • VGA Optional 
  • Powerful trigger function 
  • 32 kinds of automatic measurement function 

 

Technical specifications

Bandwidth  100 MHz 
Sample Rate  1 GS/s 
Channels  2 CH 
Waveform Interpolation  (sin x) / x 
Memory Depth  Single channel: maximum 1 M;
Dual channel: maximum 512 K (4 K, 16 K, 40 K optional) 
SEC/DIV Range  4 ns/div to 40 s/div 
Sampling Rate and Delay Time Accuracy  ±50 ppm over any ≥1 ms time interval 
Delta Time Measurement Accuracy (full bandwidth)  Single shot, Normal mode: ±(1 sample interval + 100 ppm × reading + 0.6 ns)
>16 times above average (1 sampling interval + 100 ppm × readings + 0.4 ns)
Sampling interval = SEC/DIV ÷ 200 
A/D Converter  8-bit resolution 
Position Range  ±400 mV (2 mV/div to 20 mV/div)
±2 V (50 mV/div to 200 mV/div)
±4 V (500 mV/div to 2 V/div)
±50 V (5 V/div) 
VOLTS/DIV Range  2 mV/div to 5 V/div at input BNC 
Bandwidth Limit (typical)  20 MHz 
Low Frequency Response  ≤10 Hz at output BNC (-3 dB) 
Rising Time  ≤3.5 ns 
Vertical Gain Accuracy  3% for sample or average acquisition mode, 5 V/div to 10 mV/div;
4% for sample or average acquisition mode, 5 mV/div to 2 mV/div 
Trigger Types  Edge, Video, Pulse, Slope, Over time, Alternative, Code-type, Duration, Queue, Repeat 
Trigger Source  CH 1, CH 2, EXT, EXT/5, AC Line 
Input Coupling  DC, AC or GND 
Input Impedance, DC Coupling  1 MΩ ±2% for 20 pF ±3 pF 
Probe Attenuation  1 X, 10 X 
Support Probe Attenuation Coefficients  1 X, 10 X, 100 X, 1000 X 
Cursors Measurement  Voltage difference between cursors: delt V
Time difference between cursors: delt T
Reciprocal of delt T in Hertz (1 / delt T) 
Automatic Measurements  Frequency, Period, Mean, Peak to peak, Cycle RMS, Minimum, Maximum, Rise Time, Fall Time, Positive Width, Negative Width 
Display  7 in (17.7 cm) TFT 16 K Color LCD (800 pixels x 480 pixels) 
Size  12.3 in x 5.5 in x 4.2 in (313 mm × 142 mm × 108 mm) 
Weight  4.5 lb (2.08 kg) 

Reviews

There are no reviews yet.

Be the first to review “GAOTek 2 Channels Mixed Signal Oscilloscope”

Your email address will not be published. Required fields are marked *

Content missing