GAOTek Automated Ultrasonic Flaw Detector
This Automated Flaw Detector has pulse repetition frequency of 20 Hz to 2000 Hz, dynamic range of ≥38 dB, and sensitivity leaving of >66 dB
Description
Description
Technical Specifications
| Range | 0 in to 393.7 in (0 mm to 10000 mm), at steel velocity |
| Material Velocity | 100 m/s to 20000 m/s |
| Pulse Repetition Frequency | 20 Hz to 2000 Hz |
| Dynamic Range | ≥38 dB |
| Linearity | Horizontal ± 0.2%, Vertical 2.0%, Amplifier Accuracy ± 1 dB |
| Resolving Power | >40 dB (5P14) |
| Sensitivity Leavings | >66 dB |
| Reject (suppression) | 0% to 80% full screen height |
| Test Modes | Pulse echo, dual element and thru-transmission |
| Probe Types | Single Straight, Single Angle, Dual Straight, Dual Angle, Through, Creeping, Surface |
| Gate Monitors | Two independent gates controllable over entire sweep range |
| Units | Inch or milli meter |
| Power Requirements | AC Mains 100 V AC to 240 V AC, 50 Hz to 60 Hz |
| Display Delay | -20 µs to 3400 µs |
| Probe Delay/Zero Offset | 0 µs to 99.99 µs |
| H×W×D(mm) | 9.44 in × 5.9 in × 1.96 in (240 mm × 150 mm × 50 mm) |
| Pulse Energy | 70 V, 100 V, 200 V, 300 V, 400 V, 500 V selectable |
| Rectification | Positive half wave, negative half wave, full wave, RF System |
| Bandwidth (amplifier bandpass) | 0.2 MHz to 20 MHz |
| Gate Monitors | Two independent gates controllable over entire sweep range |
| Sensitivity | 110 dB max in selectable resolution 0.1 dB, 1.0 dB, 2.0 dB, 6.0 dB |
| Transducer Connections | LEMO 01 |
| Operating Temperature | 18 °F to 122 °F (-10 ℃ to 50 ℃) |
| Storage Temperature | -22 °F to 122 °F (-30 ℃ to 50 ℃) |
| Weight | 3 lbs (1.4 kg) |