GAOTek Cable And Network Tester

GAOTek cable and network tester verify cable performance up to 10 Gb/s with this cable and network tester advanced kit to solve network connectivity problems using frequency-based measurements.

GAOTek-LTP-113

Description

Overview

GAOTek cable and network tester verify cable performance up to 10 Gb/s with this cable and network tester advanced kit to solve network connectivity problems using frequency-based measurements. In addition, this kit includes a remote ID, a patch cord, an AC charger, a universal coupler, a probe, a USB-C to USB-A cable, a hanging strap, and a carrying case. It comes with remote IDs 1 to 7, IntelliTone probe, quick reference guide, USB-C to USB-A cable, charging cable (with international adapters), Cat6A patch cord, RJ45 or 11 modular adapters, hanging strap with remote ID holder, and duffle bag. It is a testing solution to verify cable performance up to 10 Gb/s and solve network connectivity problems. It validates cable performance using frequency-based measurements and provides distance to fault information along with a wire map of the cable under test. It also performs nearest switch diagnostics to identify key network issues and validate switch configuration eliminating the need of using another device. Additional features include Analog and Digital Toning, Port Blink, 802.1x authentication, Remote Office Locators, and the ability to manage results.

 

Features

  • Includes tester, remote IDs, IntelliTone probe, accessories, duffle bag
  • Max cabling speed: 10 Gb/s
  • POE device installation or troubleshooting
  • Switch info identification
  • Documentation with this
  • Analog or Digital tones for cable location
  • Tester, remote IDs, IntelliTone probe, accessories, duffle bag
  • Max cabling speed: 10 Gb/s
  • POE device installation or troubleshooting
  • Switch info identification

 

Technical Specifications

Diagnostic Protocols (LLDP) (CDP) (FLP)
Power Over Ethernet Compatibility IEEE 802.3 af or at (SW v1.0)
Port Blink Blink the light of the connected port
Test Port Shielded 8-pin modular jack accepts 8-pin modular (RJ45) plugs
Length (Maximum) 0.18 mi (305 m)
Vibration Random, 2 g, 5 to 500 Hz
Operating Relative Humidity 0% to 90%
Host Interface USB type C
Diagnostic Protocols Link Layer Discovery Protocol (LLDP)
Cisco Discovery Protocol (CDP)
Fast Link Pulses (FLP)
Nearest Device Diagnostics, (If Available Through Diagnostic Protocols) Switch name
Port number
VLAN name
Advertised data rates
Advertised duplex
Power Over Ethernet Compatibility IEEE 802.3 af or at (SW v1.0)
Hardware negotiation with signature resistance
Software negotiation with LLDP or CDP
Power Over Ethernet Diagnostics Advertised power class (1 to 4) (SW v1.0)
Advertised available power
Powered pairs
Diagnostics for both single and dual signatures
Power Over Ethernet Measurements Loaded voltage (V)
Loaded power (W)
Port Blink Blink the light of the connected port
Test Port Shielded 8-pin modular jack accepts 8-pin modular (RJ45) plugs
Commissioning Auto Tests 10 G BASE-T, 5 G BASE-T, 2.5 G BASE-T, 1000 BASE-T, 100 BASE-TX, 10 BASE-T, Wire map Only
Test Speed: 6 s for lengths <229.65 ft (70 m)
Cable Types Balanced twisted-pair cabling
Unshielded twisted pair
Screened twisted pair
2-pair or 4-pair
Wire Map-only Tests Document wire map
Length of each pair
Diagnose split pairs
User selectable crossover settings (straight through, half crossover, full crossover)
Test speed: 1 s for lengths <0.07 mi (120 m)
Nominal Velocity of Propagation (NVP) User settable
Tone Generator Generates digital tones compatible with Fluke Networks IntelliTone probe
Generates analog tones compatible with general analog probes.
Drop 3.28 ft (1 m) drop, 6 sides
Vibration Random, 2 g, 5 to 500 Hz
Operating Altitude 13, 2.48 mi (4000 m)
10, 1.98 mi (3200 m) with AC adapter
Operating Relative Humidity 0% to 90%, 32 °F to 95 °F (0 to 35°C)
0% to 70%, 95 °F to 113 °F (35 to 45°C)
Temperature Operating: 32 °F to 113°F (0 to 45°C)
Storage: -4 °F to 1122°F (-20 to 50°C)
Display 800 x 480 color capacitive multi-touch
Host Interface USB type C
Power Adapter Input: 100 to 240 V AC ±10%, 50 Hz or 60 Hz
Output: 15 V DC, 2 A maximum; Class II
Battery Type: Lithium-ion, 3.6 V, 6400 mAh
Life: 8 hrs typical
Charge time: 4.5 hrs
Charging temperature range: 32 °F to 104°F (0 to 40 °C)
Dimensions 8.5 in x 4.5 in (21.59 x 11.43 cm)
Weight 1 lb (624 g)

Reviews

There are no reviews yet.

Be the first to review “GAOTek Cable And Network Tester”

Your email address will not be published. Required fields are marked *

Content missing