Click to enlarge
GAOTek Component Testing LCR Meter
Back to products
GAOTek Measuring Tools Portable Coating Thickness Gauge

GAOTek Resistance Tester Meter

GAOTek resistance tester meter is high precision with wide-range, adopts high-performance 32-bit ARM microprocessor control, can make measurements in real-time automatically.

Add to quote
SKU: GAOTek-DLLCRM-208 Category:
Description

Description

Overview

GAOTek resistance tester meter is high precision with wide-range, adopts high-performance 32-bit ARM microprocessor control, can make measurements in real-time automatically. can make precision measurements to power supply devices at any place. Resistance test range 10 μΩ to 200 kΩ, Max display 20000 dgt with temperature compensation function. can guarantee 0.1 % accuracy even under the test speed of 15 times per second, And the reading jitter is controlled below 3 words. The current mode can meet different test requirements. Equipped with a Mini-USB communication interface for remote control data collection, and analysis, U disk interface can record the value change of measured products. This device can test all kinds of high, medium, and low-value resistors, all kinds of switch contact resistances, connector plug resistance; relay coil package and contact resistance; transformer, inductor, motor, deflection coil winding resistance; conductor resistance; metal riveting resistors for cars, boats, and airplanes, printed circuit board lines and hole resistance etc.

 

Technical Specifications

Display 3.5 in (88.9 mm) colour 16 M TFT-LCD display
Parameter DC resistance
Accuracy 0.1 %
Range 10 μΩ to 200 kΩ
Signal Source Max current: <1 A current mode: high
Range 7 range auto, manual & nominal
Speed 3 times per second
Display Result Compare way: ABS, PER, SEQ
Max Display Compare way: ABS, PER, SEQ)
Adjustment Short-circuit zero-adjust for each range
Comparator Build in sorting record, OK/NG sorting result, display
Trigger Internal; Manual
Test Lead 4 terminal shielding (2 check and 2 driving terminal) External shielding ground section
Interface Build -in Mini-USB (VCP)
Power Supply Input: 100 V to 240 V and 50 Hz or 60Hz 0.35 A; output: 9 V 1 A DC
Battery Parameters 8.4 V, Li, 2200 mAh rechargeable battery
Charging Time Max charging time:300Min
Working Time ≥ 8 hours
Size 5.12 in x 8.29 in x 1.49 in (130.23 mm x 210.76 mm x 37.88 mm)
Weight 1.43  lb (650 g)