GAOTek XFP Transceiver with 10 Gb/s (40km)

This 10 Gigabit 1550nm XFP Transceiver is used with single-mode optical fiber to reach up to 24.85 miles (40km) transmission distance.

GAO-XFP-103

Description

Overview:

This 10 Gigabit 1550nm XFP Transceiver is used with single-mode optical fiber to reach up to 24.85 miles (40km) transmission distance. It provides a built in Digital Diagnostics Functions. It has a cooled EML type transmitter and PIN receiver. Small form-factor pluggable (XFP) modules are hot swappable and protocol independent. It complies with 10-Gigabit Ethernet 10GBASE- ER/EW per IEEE 802.3ae and RoHS- 6 standards.

Key Features:

  • Up to 24.85 miles (40km) transmission distance.
  • Cooled 1550nm EML transmitter and PIN Receiver.
  • Supports 9.95Gb/s to 11.3Gb/s bit rates.
  • Full Duplex LC connector.
  • Hot-pluggable XFP footprint.
  • No Reference Clock required.
  • Built-in digital diagnostic functions.
  • Standard bail release mechanism.
  • Supports Lineside and XFI loopback.
  • RoHS-6 Compliant (lead-free).
  • Power dissipation <2.5 W.
  • Industrial Case operating temperature range from -40 °F to 185 °F (-40°C to +85°C).
  • Commercial Case operating temperature range from 32 °F to 158 °F (0°C to +70°C).

Technical Specifications:

Working RangeUp to 24.85 miles (40km)
Standards10-Gigabit Ethernet 10GBASE- ER/EW per IEEE 802.3ae.

10G Fiber Channel 1200-Mx-SN-I.

RoHS-6 compliant.

Class 1 Laser Product.

Data rate10Gb/s
Wavelength1550nm
ConnectorLC
TransmitterEML
ReceiverPIN
Transmitter output optical Power-1 dBm to 4 dBm
Receiver Sensitivity-16.5 dBm
Receiver Input Saturation Power+0.5 dBm
Supply Voltage1.8V,3.3V
Maximum Power Consumption<2.5W
Transmitter Input Differential Impedance100Ω
Dimensions3.07in x 0.72in x 0.45in (L 78mm x W18.3mm x   H 11.4mm)
Relative Humidity5% to 95%
Storage Temperature-40 °F to 185 °F (-40°C to 85°C)
Case Operating TemperatureIndustrial-40 °F to 185 °F (-40°C to +85°C)
Commercial32 °F to 158 °F (0 °C to 70 °C)

Additional Information:

Applications

Ideal to be used on applications such as

  • 40KM 10G Fiber Channel
  • SONET OC-192 &SDH STM 64
  • 10GBASE-ER/EW 10G Ethernet

Ordering Information:

Product IDMediaWavelengthTransmission DistanceTemperature Range
GAO-XFP -103

 

single-mode fiber1550nm24.85miles (40km)Commercial

32°F to 158°F (0°C to +70°C)

GAO-XFP -103A

 

single-mode fiber1550nm24.85miles (40km)Industrial

-40 °F to 185 °F (-40°C to +85°C)

Digital Diagnostics Functions:

  • GAOTek GAO- XFP -103 series transceivers support the 2-wire serial communication protocol as defined in the XFP MSA.
  • Additionally, GAOTek XFP Transceivers provide a unique enhanced digital diagnostic monitoring interface which allows real-time access to device operating parameters such as transmitter optical power, receiver optical power, transceiver temperature, transceiver supply voltage and laser bias current. It defines an alarm system and warning flags, which alerts the end users when particular operating parameters are outside of a factory set normal range.
  • Standard XFP Serial id provides access to identification information that describes the transceiver’s capabilities, standard interfaces, manufacturer and other information.
  • XFP MSA defines a 256-byte memory map in EEPROM that is accessible over a 2 wire serial interface at the 8 bit address 1010000X (A0h).
  • The operating and diagnostics information is monitored and reported by a Digital Diagnostics Transceiver Controller (DDTC) inside the transceiver, which is accessed through a 2-wire serial interface. The memories are organized as a series of 8-bit data words that can be addressed individually or sequentially

Electrical characteristics:

ParameterSymbolMinTypeMaxUnitNote
Module Total Power   2.5W1
Transmitter      
Input Differential ImpedanceRin1002
Single ended data input swingVin, pp120820mV
Transmit Disable VoltageVD2.0VccV3
Transmit Enable VoltageVenGNDGND+ 0.8V
Transmit Disable Assert Time10us
Receiver      
Differential data output swingVout,pp340850mV4
Data output rise timetr38ps5
Data output fall timetf38ps5
LOS FaultVLOS faultVcc–0.5VccHOSTV6
LOS NormalVLOS normGNDGND+0.5V6

Notes:

  1. Maximum total power value is specified across the full temperature and voltage range.
  2. After internal AC coupling.
  3. Open circuit.
  4. Into 100 ohms differential termination.
  5. These are unfiltered 20-80% values
  6. Loss of Signal is open collector to be pulled up with a 4.7kΩ – 10kΩ resistor to 3.15 – 3.6V.
  • Logic 0 indicates normal operation.
  • Logic 1 indicates no signal detected.
  1. As per the XFP MSA Specification 1.

Optical Characteristics:

ParameterSymbolMinTypeMaxUnit
Transmitter     
Average Optical  PowerPAVE-14dBm
Optical Wavelengthλ15301570nm
Side mode Suppression ratioSMSR30dB
Optical Extinction RatioER8.2dB
Average Launch power of transmitterPOFF-30dBm
Eye Mask Margin30%
Receiver     
Receiver SensitivityRSENS-16.5dBm
Wavelength RangeλC12701610nm
Input Saturation Power (Overload)Psat0.5dBm
Receiver ReflectanceRrx-27dB
LOS AssertLOSA-32dBm
LOS De -AssertLOSD-18dBm
LOS Hysteresis0.5dB

PIN Diagram:

PIN Descriptions:

PinLogicSymbolName/DescriptionNote
1GNDModule Ground1
2VEE5Optional –5.2 Power Supply – Not required
3LVTTL-IMod-DeselModule De-select; When held low allows the module to respond to 2-wire serial interface commands
4LVTTL-OInterruptInterrupt (bar); Indicates presence of an important condition which can be read over the serial 2-wire interface3
5LVTTL-ITX_DISTransmitter Disable; Transmitter laser source turned off
6VCC5+5 Power Supply
7GNDModule Ground1
8VCC3+3.3V Power Supply
9VCC3+3.3V Power Supply
10LVTTL-ISCLSerial 2-wire interface clock
11LVTTL-I/OSDASerial 2-wire interface data line3
12LVTTL-OMod_AbsModule Absent; Indicates module is not present. Grounded in the module.3
13LVTTL-OMod_NRModule Not Ready; GAOTek defines it as a logical OR between RX_LOS and Loss of Lock in TX/RX.3
14LVTTL-ORX_LOSReceiver Loss of Signal indicator3
15GNDModule Ground1
16GNDModule Ground1
17CML-ORD-Receiver inverted data output
18CML-ORD+Receiver non-inverted data output
19GNDModule Ground1
20VCC2+1.8V Power Supply – Not required
21LVTTL-IP_Down/RSTPower Down; When high, places the module in the low power stand-by mode and on the falling edge of P_Down initiates a module reset

 

Reset; The falling edge initiates a complete reset of the module including the 2-wire serial interface, equivalent to a power cycle.
22VCC2+1.8V Power Supply – Not required
23GNDModule Ground1
24PECL-IRefCLKReference Clock non-inverted input, AC coupled on the host board –Not required2
25PECL-IRefCLK-Reference Clock inverted input, AC coupled on the host board – Not required2
26GNDModule Ground1
27GNDModule Ground1
28CML-ITD-Transmitter inverted data input
29CML-ITD+Transmitter non-inverted data input
30GNDModule Ground1

Notes:

  1. Module circuit ground is isolated from module chassis ground within the module.
  2. A Reference Clock input is not required .If present, it will be ignored.
  3. Open collector; should be pulled up with 4.7kΩ – 10kΩ on host board to a voltage between 3.15V and 3.6V.

Mechanical Specifications:

GAOTek’s XFP transceivers are compliant with the dimensions defined by the XFP Multi-Sourcing Agreement (MSA).

XFP transceiver (dimensions are in mm)

PCB Layout and Bezel Recommendations:

XFP Host Board Mechanical Layout (dimensions are in mm)

Regulatory Compliance:

FeatureReferencePerformance
Laser Eye SafetyFDA 21CFR 1040.10, 1040.11 IEC/EN 60825-1,2Class 1 laser product
Component RecognitionIEC/EN 60950, ULCompatible with standards
ROHS2002/95/ECCompatible with standards
Electrostatic discharge(ESD)IEC/EN 61000-4-2Compatible with standards
EMCEN61000-3Compatible with standards
Electromagnetic Interference(EMI)FCC Part 15 Class B EN 55022 Class B (CISPR 22A)Compatible with standards