Leading North America Supplier - 20 Years of Innovation - Shipping Globally
ethernet test module
ethernet test module

GAOTek Handheld Gigabit Ethernet Test Module

ID: A0070008tek
Category:

USD Call for Quote

Overview

GAOTek Handheld Gigabit Ethernet test module is a highly efficient test instrument which designed for Ethernet layout and integration tests which conforms to Ethernet test standards. This instrument is required for testing from physical layer to service layer of emerging (or next generation) networks. The Ethernet tester is the new Ethernet tester to qualify Ethernet service over LAN and RAN deployment. This is a highly efficient test instrument for service providers to ensure SLA KPIs with the subscribers.

Key Features

  • RFC2544 measurement: Throughput, latency, packet delay variation, frame loss and back-to back tests
  • Y.1564 measurement: Up to 10 service profiles can be configured to emulate audio, video and data streams in round-trip or one-way measurement mode
  • EtherBERT measurement: Test Layer 1 to Layer 4 BER streams with independent packet configuration and statistics measurement
  • Packet stream generation and measurement: Up to 10 packet streams can be generated and measured simultaneously to verify the QoS of Ethernet services. Each packet stream can be configured independently with different MAC/IP source/destination addresses, VLAN (Q-in-Q), MPLS, TCP/UDP source/destination ports, PRBS payload, packet size and bandwidth
  • Loopback discovery: Any remote loopback device can be discovered over the local network automatically or manually to increase the test efficiency
  • Smart Loopback and 802.3 ah OAM Loopback: Support Layer 1 to Layer 4 user-transparent smart loopback
  • Through mode monitor real-time packet statistics over live service networks
  • Stream statistics in details Transmit and receive statistics– line/data bit rates, Broadcast/ Multicast/Unicast frames, frame Dimension distribution, error frames, packet delay, packet jitter and VLAN/MPLS/TCP/UDP frames
  • VLAN and Q-in-Q support: Up to 3 VLAN tags
  • IPv6 and IPv4 support: Support dual-stack IPv6 and IPv4 packet generation and measurement
  • Error statistics Support: Statistics of link disconnection, loss of signal (LOS), frequency offset, symbol error, BIT error, FCS error, over size error, fragmentation error and runt error.
  • Full dual port test: Support full dual port test with each interface running independent test Auxiliary functions • Optical Power Meter
  • IP tools: Ping, TraceRoute, DNS, DHCP and FTP/HTTP upload/download
  • Standard report generation
  • Web browser surfing
  • USB flash drive saving/loading of test profiles and measurement reports
  • Visual Fault Locator (VFL)

Technical Specifications

Optical Interface
2 SFP Interface, Support GigE
Available Wavelength 850 nm, 1310 nm and 1550 nm
  1000Base-SX 1000Base-LX 1000Base-ZX
Wavelength (nm) 850 1310 1550
Tx Level (dBm) -9 ~ -3 -9 ~ -3 0 ~ +5
Rx Level Sensitivity (dBm) -20 -22 -22
Transmission Distance 550 m 0.62 mi (10 km) 24.85 mi (40 km)
Transmission Bit Rate (Gbit/s) 1.25 1.25 1.25
Receiving Bit Rate (Gbit/s) 1.25 1.25 1.25
Tx Working Wavelength Range (nm) 830 ~ 860 1270 ~ 1360 1540 ~ 1570
Measurement Accuracy
Frequency (ppm) ±4.6 ±4.6
Optical Power (dB) ±2
Jitter Compliance EEE 802.3
Ethernet Category EEE 802.3
Connector LC
Transceiver Category SFP
Electric Interface
2 ports: 10/100/1000 Base-T Full duplexing
Automatic or Manual Detecting through/crossover Cable
  10 Base-T 100 Base-TX 1000 Base-T
Tx Bit Rate 10 Mbit/s 100 Mbit/s 1 Gbit/s
Tx Accuracy (ppm) ±4.6 ±4.6 ±4.6
Rx Bit Rate 10 Mbit/s 100 Mbit/s 1 Gbit/s
Rx Accuracy (ppm) ±4.6 ±4.6 ±4.6
Duplex Mode half duplex and full duplex half duplex and full duplex full-duplex
Jitter Compliance IEEE 802.3 IEEE 802.3 IEEE 802.3
Connector RJ-45 RJ-45 RJ-45
Max. Distance 0.06 mi (100 m) 0.06 mi (100 m) 0.06 mi (100 m)
General Specifications
Dimension (H x W x D) 10.07 in x 7.20 in x 2.87 in (256 mm x 183 mm x 73 mm)
Operating Temperature 32 °F ~ 122 °F (0°C  ~ 50°C)
Relative Humidity 0 % ~ 9 5% (non-condensation)
Charging Time 5 hours from full discharge
Weight(with battery) 3.96 lbs (1.8 kg)
Storage Temperature -4 °F ~ 158 °F (-20 °C ~ 70 °C)
Working Time Over 4 hours

Additional Information

GAOTek’s Gigabit Ethernet test module support many standards of Ethernet service testing to meet customers’ needs completely.

  • RFC2544 measurement: Throughput, latency, packet delay variation, frame loss and back-to back tests with configurable packet structure and packet dimension running in round-trip or one-way measurement mode.

RFC2544 Test

  • Y.1564 measurement: Up to 10 service profiles can be configured to emulate audio, video and data streams in round-trip or one-way measurement mode.

Service Configuration Test: CIR, EIR and overshoot

Service Performance Test: KPIs in group transmission could be measured in CIR speed to identify the QoS of the network performance including frame delay, frame delay variation (frame jitter) and frame loss rate.

Y.1564 Test

Traffic Statistic

  • EtherBERT Measurement Test Layer 1 to Layer 4 BER streams with independent packet configuration and statistics measurement. Service interruption and BIT/FCS error injection/detection with PRBS payloads are also supported.
  • Packet stream generation and measurement Up to 10 packet streams can be generated and measured simultaneously to verify the QoS of Ethernet services. Each packet stream can be configured independently with different MAC/IP source/destination addresses, VLAN (Q-in-Q), MPLS, TCP/UDP source/destination ports, PRBS payload, packet size and bandwidth.
  • Error statistics Support statistics of link disconnection, loss of signal (LOS), frequency offset, symbol error, BIT error, FCS error, over size error, fragmentation error and runt error.

Questions from our customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions