Leading North America Supplier - 20 Years of Innovation - Shipping Globally
xdsl-tester-with-adsl-adsl2-adsl2-multi-protocol
xdsl-tester-with-adsl-adsl2-adsl2-multi-protocol

xDSL Tester with ADSL, ADSL2,ADSL2 (Multi-Protocol )

ID: GT00ZZ00ZW
Category:

Call for Quote

Product Description

Overview

GAO TEK xDSL Tester with ADSL, ADSL2, ADSL2 is used to test all the objects effectively and efficiently with muti-protocol support & data memory. It is particularly used by the field operator for the telecommunication installation and maintenance. These devices could not only test the physical parameters but also help to judge whether the line is fit for xDSL service and evaluate the quality of service. This tester uses LCD display and menu operation. It could display the test results directly and intuitively. It is the ideal tool for the field technician installing and maintaining xDSL service.

Key Features

  • Test objects: ADSL; ADSL2; ADSL2+; READSL; VDSL2
  • Fast Copper tests with DMM (ACV, DCV, Loop and Insulation Resistance, Capacitance, Distance)
  • Support VLAN
  • Support Vectoring
  • Supports Modem emulation and simulating login to Internet
  • Supports ISP login (username / password) and IP Ping test (WAN PING Test, LAN PING Test)
  • Supports all multi-protocol, PPPoE / PPPoA (LLC or VC-MUX)
  • Connects to CO via allig ator clip or RJ11
  • Rechargeable Li-ion Battery
  • Beep and LEDs alarm indications (Lower Power, PPP, LAN,xDSL)
  • Data memory function
  • LCD display, Menu operation
  • Auto shut off if no any operation on keyboard
  • Compliant with all known DSLAMs
  • Software management
  • Simple, portable and money-saved

Functions

  • DSL Physical layer test
  • Modem Emulation (Replace the user Modem completely)
  • PPPoE Dialing (RFC1683,RFC2684,RFC2516)
  • PPPoA Dialing (RFC2364)
  • Telephone Function
  • DMM Test
  • Ping Function (WAN & LAN)
  • Data upload to computer and software management
  • Setup system parameter: backlight time, shut off automatically time without operation, press tone,
  • Revise PPPoE / PPPoA dial attribute, user name and password; restore factory value and so on.
  • Check dangerous voltage
  • Four grades service judge(Excellent, Good, Ok, Poor)

Technical Specifications

General Specification

Power supply Internal Rechargeable 2000mAH Li-ion battery
Battery Duration >3.5 hours
Working temperature 0-50°C
Working moisture 5%-90%
Dimensions 180mm×93mm×48mm
Weight <0.5kg
VDSL2
Standards ITU G.993.2(VDSL2).Be compatible with ADSL2+, ADSL standard.
Upstream Channel Rate (interweaved / fast mode) 0-100M
Downstream Channel Rate (interweaved / fast mode) 0-100M
The modulating bits in the DMT sub-channel 0~15 and each sub-channels’ frequency points
The number of error codes CRC, HEC, FEC, NCD, OCD
Other Parameters DSL line attenuation

DSL line noise margin

DSL line up/down maximum rate

DSL line local output power

DSLAM information

Error Code Second

Impulse Noise Protection (INP)

Cable tracking (Optional)

Support profiles Profile 8a, 8b, 8c, 8d, 12a, 12b, 17a
ADSL
Standards ITU G.992.1 (G.dmt)

ITU G.992.2(G.lite)

ITU G.994.1(G.hs)

ANSI T1.413 Issue # 2

Up channel rate 0~1Mbps
Down channel rate 0~8Mbps
Up/Down attenuation 0~63.5dB
Up/Down noise margin 0~32dB
Output power Available
Error test LCD, OCD, HEC, FEC, CRC
Display DSL connect mode Available
Display channel bit map Available
ADSL2+
Standards ITU G.992.1(G.dmt),

ITU G.992.2(G.lite),

ITU G.994.1(G.hs),

ANSI T1.413 issue #2,

ITU G.992.5(ADSL2+)Annex L, Annex M

Up channel rate 0~2.5Mbps
Down channel rate 0~24Mbps
Up/Down attenuation 0~63.5dB
Up/Down noise margin 0~32dB
Output power Available
Error test LCD, OCD, HEC
Display DSL connect mode Available
Display channel bit map Available
DMM Test
DC Voltage -400 to 400 V; Resolution: 0.1V
AC Voltage 0 to 290 V
Capacitance 0 to 1000nF; Accuracy: 0-10nF: ±2nF, 10nF-1000nF: ±2 %±2nF
Loop Resistance 0 to 20KΩ; Accuracy: 0-100: ±3%±4Ω, 100-500: ±3%, 500-20 KΩ: ±2%
Insulation Resistance 0 to 50MΩ; Accuracy: 0-1.0M: ±0.1 MΩ, 1.0-30M: ±10%±0.5 MΩ

Additional Information

  • Test objects: ADSL; ADSL2;

Precautions

  • For the first time use, please make sure that the battery is fully charged before initiating machine. (refer to 5.14 item)
  • If there is any abnormal phenomenon during operation, please restart the instrument.
  • To ensure the normal operation, please press the operation buttons for 0.5 second until you hear the tone.
  • The test result will be affected if the user terminal is in use when testing. Please disconnect the user terminal before make a test.
  • Please confirm username, password, VPI/VCI and PAP/CHAP before making PPP dialing.
  • If there is ▲ or ▼ on screen, please operate as it indicates.

Reviews

There are no reviews yet.

Be the first to review “xDSL Tester with ADSL, ADSL2,ADSL2 (Multi-Protocol )”