Leading North America Supplier - 20 Years of Innovation - New York & Toronto
All Prices Are In USD
All Prices Are In USD
Toll Free: 1.877.585.9555 Email: sales@gaorfid.com
ID: GAO-DRONE-101
GAOTek Drone-101 features a 5.8 GHz Digital Image Transmission with a High-Resolution 18X Optical Zoom Camera.ID: GAO-DRONE-102
GAOTek Drone-102 features a 4K Video Resolution with a Multiple-Mode 30X Optical Zoom CameraID: GAOTeK-DRONE-103
GAOTek Drone-103 features a 2.7K Video Resolution and a Smart Energy Management SystemID: GAO-ENET-101
ID: GAO-ENET-103
ID: GAO-WTP-101
This 1U 10G OTN Transponder with 20 Ports is a high density transponder which adopts the advanced technology ASIC chip and can be used for Metro Access and Metro Aggregation optical transport network.ID: GAO-WTP-102
This 4x10G Transponder for Optical Fiber Link Wavelength Conversion and Transferring is designed to be used in regeneration of optical signals and transmission of rare fiber resources with various transmission distance.ID: GAO-WTP-103
This Transponder 8 SFP+ 10G 4-Channel SFP OTU Board is designed to be used in regeneration of optical signals and transmission of rare fiber resources with various transmission distance at the rate of 10Gbps and 155Mbps~2.5Gbps.ID: GAO-WPS-101
This 1+1 Optical Line Protection Device (OLP) is a high performance optical line protection device and widely used in optical line protection of PDH, SDH, C/DWDM systems, power communication network and CATV networksID: GAO-EMC-104
This 10 Base-T to 10 Base-FL Ethernet Media Converter is specially designed to be used in remote locations using multi-mode and single-mode fiber to deliver solid network performance and scalability.ID: GAO-FOE-104
This 10 G Rackmount Patch Panel for LGX MTP/MPO Cassettes comes with a fiber count of 384 fibers and available with a maximum capacity of 24 x 4ports MPO.ID: GAO-EMC-102
The 10/100/1000M Ethernet Media Converter is an Ethernet transmission device which supports 10/100M and 10/100/1000M Ethernet fiber media converters simultaneously.ID: GAO-POS-101
This 10/100/1000M Gigabit PoE Injector is designed to supply operational power to surveillance cameras and wireless LAN devices such as access points, bridges, and routers.ID: GAO-EMC-101
This 10/100/1000M media converter is designed for media conversions which adopt switching technology and supports inter-conversion of electrical signals of 10/100/1000Base-T twisted pairs with optical signals of 1000Base-SX.ID: GAO-EFC-101
This 10/100/1000M SM SC Serial Ethernet to Fiber Converter provides remote diagnosis of link loss, I-Link and Link connecting diagnostics, dynamic data transmission, and supports full-duplex or half-duplex rate indicators.ID: GAO-CFP-101
This 100Gbps, 1295-1310nm CFP transceiver is used with a single mode fiber to reach up to 6.2 Miles (10km)ID: GAO-CFP2-101
This 100Gbps, 1295-1310nm CFP2 transceiver is used with a single mode fiber to reach up to 6.2 Miles (10km)ID: GAO-CFP4-101
This 100Gbps, 1295-1310nm CFP4 transceiver is used with a single mode fiber to reach up to 6.2 Miles (10km)ID: GAO-FTS-101
This 12 core Fiber Optic Splice Tray (ODF module) is an integration melting module 12 core fiber optic splice tray.ID: GAO-FPP-101
This 144 Fiber Breakout 1U Angled LC Patch Panel is Rackmount with a capacity of 72F fiber fully loaded with 3 modules and suitable for 19 inch cassette installation.ID: GAO-VMC-103
This 16 Unidirectional/8 Bidirectional Channel Optical Multiplexer is designed to expand and grow a network. It is used in optical fiber transmission to overcome electromagnetic interference and lightning damage.ID: GAO-WCX-101
This 18 Channel Single Fiber 1270 ~ 1610 nm CWDM Mux/De-Mux is a Coarse Wavelength Division Multiplexing which is used for expansion of existing fiber capacity for service providers.ID: GAO-KSW-101
This 19" Rackmount LED KVM Switch supports a variety of industrial computers, servers, and operating systems and is used to switch host computers through hotkey or OSD menu and can manage up to 512 computers.ID: GAO-FTB-102
This 19" Rackmount Terminal Box Sliding Type is designed for a straight through connection and diverged connection in aerial layout with a box body made cold-rolled steel material.ID: GAO-CATPPA-101
This 1U 19" Keystone Patch Panel is designed to mount 19" rack and cabinet which is used for fiber optics, telecom, and Ethernet.ID: GAO-FOE-101
This 1U Fiber Optic Enclosures 4 x MPO Cassette is designed with 1U panel and can be used in high density data center infrastructure.ID: GAO-FOE-103
This 1U MPO/MTP Fiber Patch Panel 144 SM/MM Fiber is designed with maximum capacity of 4 x 6 ports MPO/MTP cassettes and is suitable for 19 inch installation.ID: GAO-CATPPA-104
This 24 Rings Metal Cable Manager Panel Network provides an engineered solution for managing high-density cabling applications on open rack systems, delivering increased performance to match the demands of data center applications.ID: GAO-WAP-101
This 300 Mbps Wireless Access Point is a high power ceiling mount access point based on the 802.11 n technology of high-speed wireless access equipment.ID: GAO-VMC-101
This 4 Unidirectional/2 Bidirectional Channel Optical Multiplexer is a 1-4 switch output optical transceiver which is used in optical fiber transmission to combat electromagnetic interference and lightning damage.ID: GAO-FRA-103
This 40 G Angled Patch Panel Modular Cassette Assembly provides secure transitions between MPO / MTP and LC discrete connector interfaces and is suitable for copper racking systems and low power budget, high speed networks.ID: GAO-FOE-102
This 4RU Rackmount Pre-Terminated Fiber Enclosures is a single and multi-mode fiber optic patch panel which is an integral part of fiber management having 12 x 6 ports MPO and used in data center infrastructure.ID: GAO-VMC-104
This GAOTek 64 Unidirectional/32 Bidirectional Channel Optical Multiplexer is designed with a mini type 1- 64 switch output optical transceiver which is used in optical fiber transmission.ID: GAO-VMC-102
This 8 Unidirectional/4 Bidirectional Channel Optical Multiplexer is a 1-8 switch output optical transceiver which is used in optical fiber transmission to combat electromagnetic interference and lightning damage.ID: GAO-FBC-104
This ADSS Fiber Optic Outdoor Self-supporting Aerial Cable is designed for easy and economical installation in campus backbones or LANs with self-supporting installations where metallic messengers cannot be used.ID: GAO-FBC-107
This ADSS Optical Fiber Cable PVC Outer Jacket is designed with single mode fiber optic cable which has diameter 0.43 in (11.0 mm) and fiber count as 48.ID: GAO-FRC-101
This Armored Fiber Optic Patch Cord can be used with both single and multi-mode fiber, providing 10G fiber transmission used in the field of communication.ID: GAO-FRC-104
This Armored Polarization Maintaining (PM) Patch Cord is built with polarization maintaining panda fiber and connected using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.ID: GAO-FUC-102
This Bend Insensitive Fiber Optic Patch Cable has a single mode and multimode patch cable with 0.079 in (2.0 mm) cable, SC-LC connector type and used for telecommunication.ID: GAO-CATPPA-102
This Cable Management Organizer Panel is designed with 12 rings metal cable manager and is used for storage solution in network cabling and in patch panel rack cable management system.ID: GAO-CATCAA-107
This Cat5e FTP RJ45 Shielded Modular Plug is designed with gold plated male connector used in Power applicationsID: GAO-CATCAA-105
This Cat5e RJ45 110 IDC Keystone Jack is designed using phosphor bronze gold-plated spring wire with UTP unshielded in 190 degree.ID: GAO-CATCAA-103
This Cat5e Toolless FTP Keystone Jack has a zinc alloy shield with a phosphor bronze gold-plated spring wire and dual IDC design.ID: GAO-CAT-101
This Cat5e/6e Ethernet Patch Cable patch cord cables is used with 10/100 Base-T networks, meeting the performance requirement of Category 5e ensuring error-free data transmissions.ID: GAO-CAT-102
This Cat5e/6e UTP 305M 23 AWG Cable uses copper conductor material with 23 AWG diameter and 8 cores.ID: GAO-CATCAA-104
This Cat6 RJ45 Toolless Keystone Jack has a zinc die casting with phosphor bronze gold-plated spring wire and a special pin design which enables twisting the patch cord to any direction.ID: GAO-FTC-101
This Ceramic Ferrule Fiber Optic Connector is a simplex SC plastic connector with 0.079 in (2.0 mm) cable and is used in variety of network applications.ID: GAO-CUSFP-101
This 1.25 Gbps 10/100/1000 BASE-T Copper SFP transceiver is used to span up to 1.2 Miles (2 Km) transmission distanceID: GAO-CUSFP-102
This 1.25 Gbps 1000BASE-T Copper SFP transceiver is used to span up to 1.2 Miles (2 Km) transmission distanceID: GAO-CUSFP-103
This 1.25 Gbps 10/100/1000BASE-T Copper SFP transceiver is used to span up to 1.2 Miles (2 Km) transmission distanceID: GAO-CUSFP-104
This 1.25 Gbps 1000BASE-T Copper SFP transceiver is used to span up to 1.2 Miles (2 Km) transmission distanceID: GAO-CATPPA-103
This D-ring Cable Manager for Patch Panel is designed with 5-D rings metal cable manager and is used for storage solution in network cabling and in patch panel rack cable management systemID: GAO-DSO-101
This Digital Fluorescence Oscilloscope (Bandwidth 500 MHz/4 Ch /Sampling rate 5 GSa/s) integrates digital oscilloscope, bus analyzer and digital voltmeter and comes with 4 channels, a bandwidth of 500 MHz, and a high sampling rate of 5 GSa/s.ID: GAO-DCM-101
This Dispersion Compensation Module (Low Loss, Wide Band Range) supports DWDM Transmission System and features a wide band range and extra-low residual dispersion.ID: GAO-FTPC-101
This Distribution Tight Buffer Optical Cable SM/MM 4-24 Fiber contains several tight-buffered fibers bundled under the same jacket and with fiberglass rod reinforcement to stiffen the cables and prevent damage.ID: GAO-CATPPA-105
This Double Section Wall Cabinet 6U have removable, locking side panels for easy access, rear swing frame allowing easy access to equipment and cabling, and built-in fans to keep the equipment cool.ID: GAO-WOM-101
This Dual Fiber 1260 ~ 1620 nm OADM is designed for dual fiber applications and is used in metro ring fiber network and telecommunications.ID: GAO-FTC-102
This E2000 APC Fiber Optic Connector is a high performance 2-hole flange full ceramic ferrule with 900 µm cable and an integrated protective cap.ID: GAOTek-ECT-102
GAOTek Eddy Current Conductivity Meter is a professional device used to precisely measure the thermal performance, conductivity, and purity of the material. This conductivity meter uses 60 kHz to inspirit, matching the aviation industry standards, with dually interpreted data in %IACS or MS/m units.ID: GAO-WOA-101
This EDFA C Band Booster Amplifier is designed for amplifying optical transmission system and supports Single wavelength application in Booster Amplifier and C-Band Multi wavelength application.ID: GAO-WOA-102
This EDFA C Band Line Amplifier is designed to amplify optical transmission system which supports C-Band Single wavelength and Multi-wavelength application.ID: GAO-WOA-103
This EDFA C Band Pre Amplifier is designed for amplifying optical transmission system and supports Single wavelength application in Pre Amplifier and C-Band Multi wavelength applicationID: GAO-FPG-104
This Fiber Optic Armoured Pigtail is designed using stainless steel tube with mini armored protection which supports single mode and multimode fiber.ID: GAO-FRA-102
This Fiber Optic Assembly MTP Adapters is used for high-density back plane and Printed Circuit Board (PCB) solutions in data and telecom systems.ID: GAO-FBC-103
This Fiber Optic Cable Non-armoured Loose Tube Cable are designed to provide high fiber counts with flexibility required for most demanding installations and can be used in both indoor and outdoor.ID: GAO-FBC-106
This Fiber Optic Cable Plenum Rated Indoor/Outdoor is used in fiber optic cabling installation with pulling eye in the ends and plenum rated jacket material.ID: GAO-FPG-102
This Fiber Optic Fan out Pigtail is used with single mode and multimode fiber which provides heat shrinkable tube and Low insertion loss.ID: GAO-FOS-104
This Fiber Optic FBT Splitter or Coupler (SM, 1310 ~ 1550 nm) is designed to combine or distribute optical signals from single/multiple inputs to single/multiple outputs bi-directionally in optical fiber systems.ID: GAO-FTC-104
This Fiber Optic FC Connector with FC Patch Cord is used multi-mode and single-mode fiber and is widely used in multimode networks, including LANs for buildings and campuses.ID: GAO-FBC-102
This Fiber Optic FTTH Drop Cable LSZH Jacket is designed to be used for connections between the dome closure, small dwelling unit/warehouse and independent homes which is made up of FRP (Fiber Reinforced Plastics), steel wire and a LSZH outer jacket.ID: GAO-FTC-107
This Fiber Optic LC APC Connector RJ45 Push Pull Style Housing offers a LC small form factor (SFF) field polished connector with rear pivot latch and compatible with TIA/EIA-604 FOCIS-10 standards.ID: GAO-FBC-101
This Fiber Optic PDLC Patch Cord, Waterproof Outdoor Patch Cable is designed with metal protective devices and standard size for Duplex LC connectors which can be used for 3G/4G network communications.ID: GAO-FPG-101
This Fiber Optic Pigtail 900 μm Buffered Fiber is used with Single mode and multimode fiber for field fusion splice during installation.ID: GAO-FTPC-102
This Fiber Optic Pre-terminated Cable MM/SM for Indoor/Outdoor are superior full-line fiber optic cables that can be used in large data centers or typical LAN offices or in campus-wide networks to reduce time in deployment and to improve project investments.ID: GAO-FOS-102
This Fiber Optic Splitter 19" Rackmount Indoor is a passive component used in PON FTTX System networks to split the fiber optic light into several parts at a certain ratio.ID: GAO-FOS-101
This Fiber Optic Splitter Low Insertion Loss Type (Connector, 1260 ~ 1650 nm) is a passive device that transforms one outputted signal to several optical signals with SC/APC connector.ID: GAO-FOS-103
This Fiber Optic Splitter Slot Box /ABS Box/LGX Box /1U Rackmount Type (Connector, 1260 ~ 1650 nm) is a passive device that transforms one outgoing optical signal to several optical signals.ID: GAO-FPC-101
This Fiber Patch Cable SM/MM is designed with low insertion loss and high return loss which can be used in high vibration environments.ID: GAO-FOA-110
This Fixed Optic Attenuator 10 dB (Low Polarization FC APC) is a passive device mainly used to reduce the amplitude of a light signal without any significant change in the wave form itself.ID: GAO-FOA-108
This Fixed Optic Attenuator 12 dB (Female to Female 850 nm) is used in the fiber optic links to reduce the optical power at a certain level and has an attenuation value of 12 dB.ID: GAO-FOA-102
This Fixed Optic Attenuator 15 dB (inline Steel Tube Ceramic Ferrule) has an in-line fixed loss that reduces the source power to an acceptable detection level with 15 dB attenuation value.ID: GAO-FOA-109
This Fixed Optic Attenuator 15 dB (Male to Female Variation Scale 0 ~ 30 dB) is mainly used in communication systems to reduce optical power launched onto the photo detector and provides an accurate attenuation over a wide range of wavelengths.ID: GAO-FOA-107
This Fixed Optic Attenuator 3 dB (SM Male to Female Kits SC Port) is designed for laboratory, manufacturing, or field applications with 3 dB attenuation value.ID: GAO-FOA-104
This Fixed Optic Attenuator 5 dB (Build out SC/FC) is designed to be used in both lab and commercial applications to reduce the optical power light in the systems with build out type attenuator.ID: GAO-FOA-103
This Fixed Optic Attenuator 5 dB (Portable ST-ST Air Gap) is designed to be used in CATV equipment as in-line to reduce the fiber optic power by a certain fixed value with simplex fiber type.ID: GAO-FOA-105
This Fixed Optic Attenuator 5 dB (SC-SC Plug in SM) is a fixed In-line attenuator for single-mode fiber with high precision doping technology.ID: GAO-FOA-106
This Fixed Optic Attenuator 7 dB(LC Fixed Female to Female Plastic housing) is designed to reduce the power in a fiber optic cable and can be used for attenuating single mode fiber connectors in various applications.ID: GAOTek-DRONE-109
GAOTek professional foldable Drone is a high-performance instrument with intelligent power management made using ultra-light materials.ID: GAO-FDC-102
This FTTH/Splice Boxes Waterproof Senior Custom UV-Resistant are used for connecting trunks and distribution of optical fiber cables for functions like splicing, storage and distribution and mainly used in telecom equipment or network equipment rooms.ID: GAO-FGD-101
This Function Generator (10 MHz ~ 60 MHz) combines Arbitrary Waveform Generation and Function Generation and comes with advanced Direct Digital Synthesizer (DDS) technology to provide stable, precise, pure and low distortion signal.ID: GAO-GBICBD-101
The 1.25 GB CWDM GBIC BIDI transceiver is used with Single-mode fiber to span upto 49.7 Miles (80Km).ID: GAO-GBICBD-102
The 1.25 GB 1490/1550nm GBIC BIDI transceiver is used with Single-mode fiber to span up to 49.7 Miles (80Km).ID: GAO-GBICBD-103
The 1.25 GB 1310/1550nm GBIC BIDI transceiver is used with Single-mode fiber to span up to 24.8 Miles (40Km).ID: GAO-GBICBD-104
The 1.25GB 1310/1550nm GBIC BIDI transceiver is used with Single-mode fiber to span up to 6.2 Miles (10Km).ID: GAO-GBICBD-105
The 1.25 GB 1310/1490nm GBIC BIDI transceiver is used with Single-mode fiber to span up to 24.8 Miles (40Km). The Transmitter section uses a DFB laser transmitter to transmit optic signals.ID: GAO-GBICBD-106
The 1.25 GB 1310/1490nm GBIC BIDI transceiver is used with Single-mode fiber to span up to 6.2 Miles (10Km).