Click to enlarge
Benchtop Portable Colorimeter for Precise Color Analysis - GAOTek
Back to products
GAOTek Industrial Benchtop Colorimeter

GAOTek Multi Parameter Benchtop Colorimeter

GAOTek multi-parameter benchtop colorimeter is used to measure the color difference for the surface paint which is affected by different viewing angles and viewing conditions.

Add to quote
SKU: GAOTek-BC-212 Category:
Description

Description

Overview

GAOTek multi-parameter benchtop colorimeter is used to measure the color difference for the surface paint which is affected by different viewing angles and viewing conditions. It can provide accurate and consistent color measurement for metallic, pearlescent and other complex special effect finished products.

 

Features

  • Multi-angle Measurement
  • More Intuitive Display
  • 256 Image Element Double Array CMOS Image Sensor
  • Concave Grating Spectrophotometric Technology
  • Color Camera Preview, Clearly Observe the Measured Area
  • Easily Analyze Data

 

Technical Specifications

Measurement Geometry 3 measurement angles (3 illumination sources, 1 receivers)
 Measure Angle 45° Receiver, 45 as 25°,45 as 45°, 45 as 110°, Conform to the standards, ASTM D 2244, E 308, E 1164, E 2194, E2539, DIN 5033, 5036, 6174, 6175-1, 6175-2, ISO 7724, 11664-4 SAE J 1545
Light Source Full spectrum LED light source with blue enhancement
Lamp Life 5 years, 3 million times measurements
Spectrophotometric Mode Concave Grating
Sensor 256 Image Element Double Array CMOS Image Sensor
Wavelength Range 400 nm to 700 nm
Wavelength Interval 10 nm
Semi band Width 10 nm
Measurement Range 0% to 600%
Measuring Aperture 0.47 in (Φ 12 mm)
Color Space CIE LAB, XYZ, Yxy, LCh,βxy, DIN Lab99
Color Difference Formula ΔE x ab, ΔE x 94, ΔE x cmc (2, 1), ΔE x cmc (1, 1), ΔE x 00, DINΔE 99, ΔE DIN 6175
Observer Angle 2° or 10°
Illuminant D65, A, C, D50, D55, D75, F1, F2 (CWF), F3, F4, F5, F6, F7 (DLF), F8, F9, F10 (TPL5), F11 (TL 84), F12 (TL 83 or U30)
Display Spectrogram or Values, Samples Chromaticity Values, Color Difference Values or Graph, PASS or FAIL Result, Color Offset
Measuring Time Approx. 1 sec for one angle, approx. 3 sec for all angles
 Repeatability Spectral reflectance Standard deviation within 0.08%, Chromaticity value, ΔE x ab 0.04 (When a white calibration plate is measured 30 times at 5 sec intervals after white calibration)
Reproducibility ΔE x < 0.10, Avg on the gray tile of BCRA tile set, ΔE x < 0.25, Avg on the color BCRA tile set
Inter-instrument Error 0.2 ΔE x 00 (Avg on reference Series II BCRA tile set)
Trigger Mode Pressure sensing trigger, button trigger, software trigger
Measuring Mode Single measurement, average measurement (1 to 99), continuous measurement (1 to 99)
Locating Mode Color camera preview
Power lithium-ion battery, 3.7 V, 3200 mAh, Continuous test 6000 times within 8 hrs of full charge
Interface USB
Data Storage 1000 pcs Standards, 4000 pcs Samples
Operating Environment 50 ℉ to 122 ℉ (10 ℃ to 50 ℃)
Operating humidity does not exceed 85%, no condensation
Storage Environment -4 ℉ to 122 ℉ (-20 ℃ to 50 ℃)
Storage humidity does not exceed 85%, no condensation
Display 3.5 in (8.8 cm) TFT color LCD, Capacitive Touch Screen
Dimension 7.6 in x 3.2 in x 5 in (195 mm x 83 mm x 128 mm)
Weight About 2.2 lb (1 Kg)