GAO Tek’s electrical LCR meters have the following functions:

• Quality factor (Q) measurement: GAO’s electrical LCR meters can measure the quality factor of a component, which is a measure of the component's energy loss.
• Equivalent series resistance (ESR) measurement: GAO electrical LCR meters can measure the equivalent series resistance of a component, which is a measure of the resistance in series with a component's ideal capacitance or inductance.
• Test frequency selection: GAO Tek electrical LCR meters can be set to test a component at a specific frequency or range of frequencies.
• Automatic range selection: Our electrical LCR meters can automatically adjust their measurement range based on the component being tested.
• Data logging: GAO’s electrical LCR meters can store measurement data for later analysis.
• Comparison mode: GAO Tek electrical LCR meters can compare measured values to preset or user-defined values, indicating pass/fail status.

GAO Tek’s electrical LCR meters are rugged, versatile and precision measurement instruments. They comply with applicable industry standards such as IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-11, IEC 61010-1, and IEC 61326-1.

Our electrical LCR meters help our customers comply with relevant U.S. government regulations such as:

• Federal Communications Commission (FCC)
• Occupational Safety and Health Administration (OSHA)
• National Institute of Standards and Technology (NIST)
• Environmental Protection Agency (EPA)
• Consumer Product Safety Commission (CPSC)
• Underwriters Laboratories (UL)

Our electrical LCR meters help our clients in complying with relevant Canadian government regulations such as:

• Industry Canada
• Canadian Occupational Health and Safety (OHS)
• Measurement Canada
• Environment Canada
• Canadian Consumer Product Safety Act (CCPSA)
• CSA Group regulations

Our electrical LCR meters have the following applications:

• Component testing: GAO’s electrical LCR meters are used to measure the electrical properties of electronic components, such as resistors, capacitors, and inductors. These measurements are used to verify component specifications, to select components for specific applications, and to diagnose component failures.
• Circuit testing: GAO Tek electrical LCR meters can be used to test the electrical properties of circuits, such as filters, oscillators, and amplifiers. These measurements are used to verify circuit specifications, to diagnose circuit problems, and to optimize circuit performance.
• Quality control: Our electrical LCR meters are used in manufacturing to ensure that electronic components and circuits meet specified tolerances and specifications. This helps to ensure that the finished products are reliable and meet customer requirements.
• Research and development: GAO electrical LCR meters are used in research and development to study the electrical properties of materials, to develop new electronic components and circuits, and to optimize existing designs.
• Education: GAO’s electrical LCR meters are used in educational settings to teach students about electronic components and circuits, and to demonstrate the principles of electrical measurement.

Our electrical LCR meters can be shipped overnight within the continental U.S. and Canada, and can be shipped globally.