Showing all 33 results

  • Sort:
Read more

ID: GAO-FTS-101

This 12 core Fiber Optic Splice Tray (ODF module) is an integration melting module 12 core fiber optic splice tray.
Read more

ID: GAO-FTC-101

This Ceramic Ferrule Fiber Optic Connector is a simplex SC plastic connector with 0.079 in (2.0 mm) cable and is used in variety of network applications.
Read more

ID: GAOTek-CD-165

This Coaxial Switch Connector has an insulation resistance of 500 MΩ, a dielectric withstanding voltage of 200V AC, and a frequency range of 0 GHz to 6 GHz.
Read more

ID: GAOTek-CNT-132

This Connector Fiber Optic Transceiver has a typical voltage supply of 3.3 V, wavelength of 1550 nm, data rate of 100 G and a distance of 24.85 mi
Read more

ID: GAOTek-CNT-101

This Connector Transceiver has a sensitivity of less than -12.6 dBm, a wavelength of 850 nm to 1330 nm, and distance of 328 ft to 6562 ft.
Read more

ID: GAO-FTC-102

This E2000 APC Fiber Optic Connector is a high performance 2-hole flange full ceramic ferrule with 900 µm cable and an integrated protective cap.
Read more

ID: GAOTek-CM-168

The Fiber Connectors have a mechanical shock of 500 G, vibration of 40 G, cable retention force of 25 lbs, and mating durability of 500 cycles.
Read more

ID: GAOTek-CNT-108

GAOTek fiber optic cable connector is the only connector in the world that is fully compatible with the SMPTE, ARIB and EBU standards.
Read more

ID: GAO-FTC-104

This Fiber Optic FC Connector with FC Patch Cord is used multi-mode and single-mode fiber and is widely used in multimode networks, including LANs for buildings and campuses.
Read more

ID: GAO-FTC-107

This Fiber Optic LC APC Connector RJ45 Push Pull Style Housing offers a LC small form factor (SFF) field polished connector with rear pivot latch and compatible with TIA/EIA-604 FOCIS-10 standards.
Read more

ID: GAOTek-CNT-109

This Fiber Optic Transceiver Connector has a data rate of 10 G to 100 G, a sensitivity of -28 dBm to -11 dBm, and a wavelength of 850 nm to 1550 nm.
Read more

ID: GAOTek-CD-167

GAOTek high retention USB connector is an industrial grade 7-port USB hub. After design and testing, it meets the EMC standards for heavy industry.
Read more

ID: GAOTek-CD-173

This Industrial Ethernet Connector has a switching capacity of 26 Gbps, a packet forwarding rate of 19.34 Mbps, and a forwarding delay of <5 us.
Read more

ID: GAOTek-CNT-131

This InfiniBand Transceiver Connector has a channel data rate of 200 Gbps, a supply voltage of 3.3 V, and a supply current of 230 mA typical.
Read more

ID: GAOTek-CD-174

GAOTek integrated RF connectors are miniaturized, lightweight connectors designed to achieve simultaneous transmission of multichannel signals.
Read more

ID: GAOTek-CNT-130

GAOTek LC adapter connector is also known as flange or optical fiber connector.
Read more

ID: GAOTek-CM-172

This Liquid Cooling Battery EV Charger Connector has frequency of 45 Hz to 65 Hz, power factor of 0.99 and efficiency at full loading of ≥93%.
Read more

ID: GAO-FTC-105

This MTRJ Fiber Optic Connector Kits for Corning/Mini Zipcord Cables closely resembles a RJ-style modular plug that is available for both multi-mode and single-mode applications and supports simplex or duplex ways of fiber communications.
Read more

ID: GAOTek-CM-171

GAOTek multi-parameter sensor waterproof connectors are one of the most comprehensive water quality monitoring products for dissolved oxygen, conductivity, turbidity, pH, chlorophyll, blue-green algae, oil-in-water, and temperature measurement in a single platform.
Read more

ID: GAO-FTC-106

This One Crimp Fiber Optic ST Connector 3.0 mm is designed with fiber optic termination method and is used in short and long distance fiber optic applications and in networking applications.
Read more

ID: GAOTek-CNT-135

This Optical Fiber Fast Connector has a grinding end face of UPC, insertion loss of less than 0.3 dB, tension test of ≥100 N and return loss of less than 50 dB.
Read more

ID: GAOTek-CNT-103

This Optical Transceiver Connector has a max data rate of 10 G, a TX power of 1 dBm to 5 dBm, and a wavelength of 1490 nm-TX, 1550 nm-RX.
Read more

ID: GAOTek-CNT-104

This Red Transceiver Optic has a wavelength of DFB CWDM 1270 nm to 1330 nm, a data rate of 40 G and a TX power of -2.7 dBm to 4.5 dBm.
Read more

ID: GAOTek-CM-166

This RF Bandpass Filter Female Connector has nominal center frequency of 805 MHz or 847 MHz, stopband attenuation of 60 dB and current of 3.5 A.
Read more

ID: GAOTek-CNT-105

GAOTek SDI fiber converter connector supports 1 Ch 12 G Video (audio embedded), 1 Ch Tally signal and 1 Ch Backward RS 485 transmitted via fiber optical cable and monitor the signal locally over a 12 G loop output.
Read more

ID: GAO-FTC-103

This SFF Fiber Optic Connectors with Pivot Latch is a small form factor field polish connector with simplex configuration, non-optical disconnect functionality and an average insertion loss of 0.35 dB.
Read more

ID: GAOTek-CNT-107

This SFP Module Transceiver Connector has a distance of 6.21 mi, wavelength of 1310 nm, a network of wireless LAN, and a data rate of 100 Gbps.
Read more

ID: GAOTek-CNT-102

This Teal Fiber Optic Transceiver Connector has a max data rate of 100 Gb/s, a max cable distance of 40 km, and a wavelength of 1310 nm.
Read more

ID: GAOTek-CNT-136

This Telecom Female Type Connector has a frequency range of 8 GHz to 18 GHz, an insertion loss of 1.7 dB, and an impendence of 50 ohms.
Read more

ID: GAOTek-CNT-106

This Transceiver Connector has a data rate of 100 Gb/s, a wavelength of 1296 nm to 1309 nm and an output impendence of 90 ohm to 110 ohm.
Read more

ID: GAOTek-CNT-100

GAOTek underwater cable connector is mainly used in marine exploration, marine communication equipment connection, shipboard equipment, etc.
Read more

ID: GAOTek-CNT-134

This Vehicle Antenna with Connector has an operation voltage of 3.3 V to 12 V DC, an impedance of 50 ohms and an azimuth coverage of 360°.
Read more

ID: GAOTek-CNT-133

This Vehicle Antenna with FAKRA Connector has an operation current of ≤100 mA, an operation voltage of 3.3 V to 12 V DC and an impendence of 50 ohms.