Click to enlarge
GAOTek LCR Meter
Back to products
GAOTEK Hand-Held Laser Methane Detector

GAOTek Digital Handheld LCR Meter

GAOTek handheld digital bridge series are integrated with a 2.8 in (7.11 cm) TFT display, flexible and convenient button operation and USB full-speed communication.

Add to quote
SKU: GAOTek-LCR-160 Category:
Description

Description

Overview

GAOTek handheld digital bridge series are integrated with a 2.8 in (7.11 cm) TFT display, flexible and convenient button operation and USB full-speed communication. Large-capacity lithium batteries can guarantee long hours of work. Function not only has a comprehensive measurement parameter but also has deviation measurement and filtering. The output frequency can be continuously adjustable. In performance, the basic accuracy is 0.2 %.

 

Features

  • Measurement frequency up to 100 kHz, adjustable in 1 Hz increments
  • Support DC resistance, electrolytic capacitor measurement
  • internal bias voltage output (10 mV to 500 mV)
  • Automatic identification of component measurements
  • Support filtering and deviation measurements
  • 8 in (7.11 cm) TFT display, 4 and a half bits display
  • USB communication interface
  • They are powered by large capacity lithium battery
  • Support SCPI protocol
  • Customize system settings, such as language, buzzer, and screen brightness
  • Basic measurement accuracy is 0.2 %
  • measurement speed is adjustable
  • Manual and automatic range
  • Open circuit and short circuit correction
  • Provide multiple kinds of test ports

 

Technical specifications

Display screen 2.8 in (7.11 cm) TFT LCD display screen
Display the number of bits Main parameter:5 bits
Secondary parameter:5 bits
Measurement parameter Main parameter: L or C or R or Z
Secondary parameter: X or D or Q or θ or ESR
Measurement range (L) 0 H to 2000 H
Measurement range (C) 0 mF to 20 mF
Measurement range (R) 0 MΩ to 20 MΩ
Measurement speed 1 times or sec (slow speed), 2 times or Sec (medium speed), 4 times or Sec (fast speed)
Correction function open circuit & short circuit correction
Filtering function the filter limit range can be set 1% to 50 %, Where the fixed point is 1 %, 5 %, 10 %, 20 %
Deviation measurement Used to compare the percentage of deviation between the component and the nominal value and display it
Others adjust the backlight brightness, USB device, and automatic shutdown time ca