Description
Overview
GAOTek milliamperes process clamp meter can measure mA signals without breaking the loop. It saves time by making fast, accurate measurements on 4 mA to 20 mA signal loops without breaking the circuit. This clamp meter is designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4 mA to 20 mA loops without breaking the loop or bringing down the system.
Features
- Best in class 0.2% accuracy
- 0.01 mA resolution and sensitivity
- Measure 4 to 20 mA signals without “breaking the loop”
- Measure mA signals for PLC and control system analog I/O
- Dual backlit display with both mA measurement and percent of 4 to 20 mA span
- Measurement Spotlight illuminates hard to see wires in dark enclosures
- Detachable clamp with extension cable for measurements in tight locations
- Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
- Automatically change the 4 to 20 mA output for remote testing
- Taking mA measurements by removing a wire and breaking the loop
- Calling the control room to isolate a loop
- Testing analog input or output on a console
- Troubleshooting devices with mA inputs and outputs
- Repairing intermittent or erratic 4 mA to 20 mA loops
Technical Specification
| Resolution or Range | 0 mA to 20.99 mA |
| Accuracy | 0.2% +2 counts |
| Resolution or Range | 21.0 mA to 100.0 mA |
| Accuracy | 1% +5 counts |
| Diameter of Measurable Conductor | 0.17 in (4.5 mm) |
| IP Rating | IP 40 |
| Operating Temperature | 50 °F to 122 °F (10 °C to 50 °C) |
| Dimensions | Diameter: 6.61 in x 9.64 in (168 mm x 245 mm) |
| Weight | 1.1 lb (500 g) |