Operation, Maintenance & Calibration of a Long-Range Drones

Operating of Long-Range Drones:

Pre-flight Checks: GAO Tek inspects the drone for any damage. Ensure propellers are secure and batteries fully charged.
Flight Planning: GAO Tek’s plot your route, considering obstacles and weather conditions. Check for any flight restrictions in the area.
Take-off: We launch the drone from a flat, open area. Ascend slowly to your desired altitude.
Flight Controls: We familiarize yourself with the controls. Practice manoeuvres in open space before attempting complex flights.
Monitoring: We keep an eye on battery life, GPS signal, and drone orientation throughout the flight.
Landing: We choose a safe landing spot. Descend gently and land the drone smoothly.

Cleaning: We regularly wipe down the drone with a microfiber cloth to remove dirt and debris. Pay special attention to the camera lens.

Inspecting Parts: We check propellers, motors, and batteries for wear and tear. Replace any damaged components promptly.

Battery Care: We follow manufacturer guidelines for battery storage and charging. Avoid overcharging or letting batteries drain completely.

Software Updates: We keep drone firmware and control software up to date to ensure optimal performance.

Compass Calibration: GAO Tek finds an open area away from metal objects or magnetic interference. Follow the manufacturer’s instructions to calibrate the drone’s compass.
IMU Calibration: We ensure the drone is on a flat surface. Access the settings menu in the control software to initiate IMU calibration.
Gimbal Calibration: If your drone has a gimbal, follow the manufacturer’s instructions to calibrate it for smooth camera operation.

GPS Calibration: We allow the drone to acquire a strong GPS signal before flight. Avoid flying in areas with poor GPS reception.

Below are general answers on how to operate, maintain and calibrate Long-Range drones from the list of GAO Tek’s Long-Range Drones.

Pre-flight Protocol: GAO Tek thoroughly inspects the drone for any physical damage or loose components. Ensure all batteries are fully charged and securely connected. Check the remote control and ensure its synced with the drone.

Flight Plan: Our research and plan your flight path, considering factors like airspace regulations, weather conditions, and potential obstacles. Use mapping software to identify optimal routes and waypoints. Communicate with relevant authorities if flying in controlled airspace.

Take-off and Flight: We find a clear, open area for take-off, away from people, buildings, and obstacles. Gradually increase throttle to lift off smoothly. Maintain a safe altitude and avoid sudden manoeuvres, especially during long-range flights. Monitor battery levels, signal strength, and GPS connectivity throughout the flight.

Landing: We choose a suitable landing spot, free from obstructions and with ample space. Descend slowly and steadily, avoiding abrupt movements. Use precision control to land the drone gently.

Routine Inspections: We conduct regular visual inspections of the drone’s frame, propellers, and electronics for signs of wear or damage. Pay particular attention to the motor mounts, landing gear, and camera gimbal.
Cleaning: We clean the drone regularly using compressed air to remove dust and debris. Use a soft, lint-free cloth dampened with isopropyl alcohol to wipe down surfaces and electronics. Inspect and clean the camera lens to maintain image quality.
Battery Care: We follow manufacturer guidelines for battery maintenance, including proper charging and storage procedures. Avoid fully draining batteries and store them in a cool, dry place when not in use. Monitor battery health and replace any aging or damaged batteries promptly.

Compass Calibration: GAO Tek finds an open area away from magnetic interference sources such as metal objects or power lines. Follow the manufacturer’s instructions to calibrate the drone’s compass using the remote control or companion app.
IMU Calibration: We place the drone on a level surface and ensure it is powered on. Access the drone’s settings menu to initiate the IMU calibration process. Follow on-screen instructions to complete the calibration, which may involve rotating the drone along multiple axes.

Gimbal Calibration: If we are equipped with a gimbal, ensure the camera is securely attached and powered on. Access the gimbal settings in the drone’s companion app and follow instructions for calibration. This typically involves stabilizing the gimbal and adjusting its orientation for optimal camera performance.
GPS Calibration: We allow the drone to acquire a strong GPS signal before flight by waiting in an open area with clear skies. Avoid flying in locations with poor GPS reception, as this can affect flight stability and accuracy.

The following are our resource pages containing useful information on Long-Range Drones:

We have Long-Range Drones in stock, and ship overnight to most parts of the U.S. and Canada.

If you have any questions about our products or want to place an order, our technical experts can help you. Please fill out this form or email us.