Advanced Gigabit Ethernet Tester for FTTH Networks – GAOTek
Explore the ultimate Gigabit Ethernet tester for FTTH networks. Experience comprehensive testing with RFC2544, Y.1564, and error injection features
Description
Description
Features
- Supports 10/100/1000 Mbps Ethernet data stream
- RFC2544, Y.1564, RFC3393, L1/L2/L3/L4 BERT tests
- Generates up to 8 data streams (MAC, VLAN, MPLS, IPV4/IPV6, etc.)
- Configures flow priority via CoS/ToS/DSCP
- Online packet capture and SLA verification
- Dual-port and SDT (Service Disruption Test) support
- Metro Ethernet service testing with 3-layer CoS
- Graphical test result display
- Ideal for gigabit Ethernet installation, maintenance, and troubleshootingv
Technical Specification
| Type | Gigabit Ethernet Tester |
| Use | Ftth |
| Network | TCP, GPRS, wifi |
| Screen | 8.89 cm (3.5 in) TFT touch screen (320×240) |
| Ethernet | 10/100M Base-T, RJ45 |
| Ethernet Feature | Auto negotiation, full and half duplex, flow control |
| Configuration | Monitor/generate, pass-through |
| Multi stream | Number of streams: up to 8 streams per port can be activated |
| Error Injection | FCS, IP check sum error, CRC4 error, bit error |
| Performance Statistics | Utilization, throughput, frame rate |
| Transmit Statistics | Total frames, unicast/multicast/broadcast |
| USB | USB2.0, type A,1 USB2.0 type B, 1 |
| Storage | 128M; |
| Relative Humidity | 0% to 95% (non-condensing) |
| EMC | EN55022/CIPSR22 EN61000-3-2 EN55024 |
| Battery | Rechargeable Li-Lon battery Working time: 8 hour Charging time: <3 hours (typical: 25°C) |
| Power Supply | Input: 100-240V AC, 50-60Hz, 2A Output: 15V DC, 2A |
| Port | Electrical interface: 2 ports, 10/100/1000M Base-T Optical interface: 2 ports, 100/1000M Base-X User select-able optical module: 850nm, 1310nm, 1550nm |
| Ethernet Feature | Auto negotiation, full and half duplex, flow control |
| Configuration | Monitor/generate, pass-through |