Description
Feature
- 16 Channels input
- Relay alarm function
- Data backup
- 220 VAC power supply
Technical Specifications
| Screen | 7 in (177.8 mm) true color TFT LCD (800 x 480 dot matrix) |
| Accuracy | Real time display ±0.2% F.S. Recall accuracy ±0.2% F.S. note thermocouple should remove cold end error)] |
| Processor | High performance arm Cortex M3 32 bit RISC core can be used to collect, record, display and alarm multiple signals at the same time |
| Memory Module | Large capacity parallel NAND FLASH flash chips are used to store historical data, and serial FRAM storage chips are used to store key parameters such as configuration parameters |
| Input Specification | Fully isolated universal input, maximum support 16 analog input |
| Voltage Input | 0 V to 5 V, 1 V to 5 V, 0 mV to 20 mV, 0 mV to 100 mV |
| Resistor Input | Res 0 Ω to 400 Ω |
| Thermal Resistance | PT 100, Cu 50, G 53, Cu 100, BA 1, BA 2, Three wire resistance balance, lead resistance < 10 Ω |
| Thermocouple | S, B, K, T, R, E, N, J |
| Radiation Pyrometer | F1, F2 |
| Tungsten Rhenium | WRe3-25 WRe5-26 |
| Current Input | 0 mAn to 10 mAn, 4 mAn to 20 mAn, 0 mA to 20 mA |
| Distribution Output | Up to 3 sets of transmitters are supported for isolated distribution 24 V DC, each group of distribution ≤ 60 mA, support other specifications of isolated distribution (e.g. 12 V DC or 5 V DC distribution output) |
| Transmission Output | Support up to 4 channels standard current output, load capacity 750 Ω maximum, convenient display instrument or DCS, PLC acquisition, achieve long distance signal transmission |
| Relay Alarm Output | Up to 6 relay alarm output, contact capacity 1 A at 250 VAC or 1 A at 30 V DC, maximum contact capacity customizable, can be configured as upper limit, lower limit alarm. |
| Communication Interface | Providing RS 232 C and RS 485 communication interfaces for users to choose from, supporting the use of RS 232 C and RS 485 at the same time, supporting the use of RS 232 C and RS 232 C at the same time, supporting Modbus RTU protocol, baud rates 1200 N 48009600, 19200, 38400, 57600) |
| Print Interface | RS 232 C direct connection to micro printer, baud rate 1200 |
| Recording Capacity | 64 MB, 128 MB, 1922 MB, 248 MB, flash capacity optional |
| Recording Interval | 1 sec to 240 sec, divided into 11 files 1 or 2 sec, 4 sec, 4 sec, 8 sec, 12 sec, 24 sec, 36 sec, 60 sec, 120 sec, 180 sec, 240 sec |
| Data Transfer | Data backup and storage support USB 1.1 USB 2.0 USB disk, support 1 G to 32 GB U disk for data transfer, strong compatibility, compatible with most of the U disk on the market |
| Power Supply Voltage | Power supply 100 VAC or 240 VAC, rated 220 VAC, 50 Hz or 60 Hz AC power supply, 24 V DC, 18 V DC to 36 V DC DC power supply, 12 V DC, 9 V DC to 18 V DC, DC power supply |
| Power Off Protection | Built in memory protection parameters and historical data, permanent storage after power off |
| Clock Protection | Integrated hardware clock, can also run accurately after power down |
| Relative humidity | 0% RH to 85% R.H (without condensation) |
| Altitude | <1.242 mi (2000 m) (other than special specifications) |
| Working temperature | 32 ℉ to 122 ℉ (0 ℃ to 50 ℃), avoid direct sunlight |
| Instrument Net Weight | Net weight ≤3.28 lb (1.5 kg) |