Description
Features
- Fast Response time
- Easy to maintain and operate
- Wide Detection range
- High accuracy(0.3ppm) with low faults
- Build-in Bluetooth and wireless module
- Transmit data in real-time
- Large Graphic and Text Display
Technical Specifications
| Items | Technical Parameter |
| Sensors | HCL Electrochemical Sensor |
| Detection Range | 0.3 ppm to 100 ppm |
| Resolution | 0.3 ppm |
| Response Time(T90) | 40 s |
| Detection Accuracy | ± 5 % |
| Gas Monitor | HCL |
| Sapmling Method | Pump suction/ Diffusion (optional) |
| Housing Material | Engineering plastic with rubber boot |
| IP Rating | IP66 (Power On)/IP67(Power Off),dustproof,waterproof |
| Humidity | 0 % RH to 95 % RH(non-condensing) |
| Display | Large graphic LCD display |
| Languages | English + symbols |
| Direct Readout | Real time data, TWA , STEL, peak data, battery voltage, date and time |
| Alarm Method | 95 Db @ 11.81 in (30 cm) buzzer and flashing red LED |
| Alarms | Gas exceeds the limit, low battery voltage, sensor failure, low battery . |
| Alarm Setting | Independent settings for TWA, STEL, high/low flow limits |
|
Data Storage |
Built-in storage capacity for 260,000 data points(approximately 2 months with a 1 minute inveral),including date,time, serial number, user ID, detection point ID, etc. |
| Sapling interval | Adjustable from 60 to 3600 seconds. |
| Data Communication | Built-in Bluetooth module for real-time wireless data transmission |
| Pump type | Built-in |
| Pump Flow Rate | 250 cc/min to 400 cc/min |
| Battery | Rechargeable lithium-ion battery: 7.4 V/6000 mAH |
| Operating Hours | Continuous operation for up to 16 hours (depending on the working environment and frequency) |
| Charging Time | 8 hours for Lithium Battery |
| Temperature | -4 °F to 122 °F (-20 ℃ to 50 ℃) |
| Size | 9.01 in x 2.04 in x 3.22 in (229 mm x 52 mm x 82 mm) |
| Weight | 1.54 lbs (700 g) (including Lithium battery) |