Click to enlarge
GAOTek High-Quality Colorimeter
Back to products
GAOTek Enterprise HD Studio Live Streaming Kit

GAOTek Enterprise Ultrasonic Flaw Detector

This Enterprise Ultrasonic Flaw Detector has frequency of 0.5 MHz to 20 MHz, display screen of High brightness color of 5.7 in, sensitivity of 62 dB.

Add to quote
SKU: GAOTek-EDA-185 Category:
Description

Description

Features

  • Measurement display mode
  • Positive wave, negative wave, full wave and wave
  • It has a linear suppression function
  • The maximum inhibition is 80% of the screen height
  • It can switch between single crystal probes
  • Double crystal probe and two inspection modes
  • It has a gate setting and alarm function
  • The position and width
  • The gate can be arbitrarily set on the screen
  • An incoming wave alarm can be set
  • 500 independent detection channels
  • Each channel set a separate set of testing parameters
  • DAC curve
  • Two display modes with angle and K value
  • The DAC curve is generated automatically
  • up to 10 points can be recorded
  • With four additional adjustable offset curves
  • AVG curve is generated automatically
  • Two types of defects can be customized
  • Automatic probe calibration function
  • With storage function
  • it can store 100 A sweep patterns
  • Parameters and D AC curve
  • Has a storage graphics playback function
  • The stored A scan graphics from the storage area
  • Displayed on the screen
  • Has a delete function to delete
  • The specified content from the storage area
  • Peak memory function
  • Freeze and thaw functions with waveform
  • Inspection parameters
  • With sound path measurement
  • Echo frequency analysis function
  • Realtime power status indication function
  • Support USB communication interface
  • Li battery, low power consumption
  • Can continuous working more than ten hours
  • Can set up buzzer alarm during operation
  • Light, convenient, easy to operate

 

Technical Specifications

Scan range Scan range (mm): 0 in to 393.7 in (0 mm to 10000 mm)Grades: 2.5,5,10,20, 30,40,50,60,70,80,90, 100,150,200, 250, 300, 350, 400, 450,500,600,700,800,900,1000,2000,3000,4000,5000,6000,7000,8000,9000, 10000. Adjusting step distance: 0.03 in (1 mm)
Pulse shift Pulse shift (ms): -7 ms to +9984 msGrades: -20, -10, 0.0, 10, 20, 50, 100, 150, 200, 250, 300, 350, 400, 450, 500, 600,

700,800,900,1000,1500,2000,2500,3000,3400.

Adjustment step:1(-7 ms to 9984 ms)
Probe zero point Probe zero point:0.0 ms to 99.99 msAdjust the step:0.01
Material sound speed Material sound speed: 3280.84 ft/s to 49212.6 ft/s (1000 m/s to 15000 m/s)7 fixed sound speeds:2260,2730,3080,3230,4700,5900,6300

Adjust the step:1
Working methods Single probe (receive and send), dual probes (one for receiving one for sending)
Frequency Range 0.5 MHz to 20 MHz
Gain adjustment 0 dB to 120 dBAdjust the step:0.2,1,2,4,6,8,10,20,50
Linear inhibition Screen height 0% to 80%, step size: 1%
Vertical linearity error Vertical linear error, not more than 3%
Horizontal linear error Within the scan range, not more than 0.2%
Flaw detection sensitivity margin ³62 dB
Dynamic Range ³32 dB
Alarm Incoming wave alarm
Display screen Display:High brightness color 5.7 in (14.47 cm) display
A Scan display area Full screen or localA Scan shows freeze and thaw A Scan-fills
Flaw detection channel 300
Data storage 500 A Scan graphics
PC communication interface standard USB
Units of measurement Mm
Power Adapter enter 100 V to 240 V or 50 Hz to 60 HzOutput 9 V or 1.5 A
Battery Lithium (Li) Battery 5000 mAh
Working temperature 32 °F to 122 °F (-10 °C to 50 °C)
Working humidity 20% to 90% RH
Interface Type BNC
Dimensions 8.66 in x 5.5 in x 1.9 in (220 mm x 140 mm x 50 mm)
Weight 2.20 lb (1.0 kg)