| Sensors |
HCL Electrochemical Sensor |
| Detection Range |
0.3 ppm to 100 ppm |
| Resolution |
0.3 ppm |
| Response Time(T90) |
40 s |
| Detection Accuracy |
± 5 % |
| Gas Monitor |
HCL |
| Sampling Method |
Pump suction or Diffusion (optional) |
| Housing Material |
Engineering plastic with rubber boot |
| IP Rating |
IP66 (Power On) or IP67 (Power Off), dustproof, waterproof |
| Humidity |
0 % RH to 95 % RH (non-condensing) |
| Display |
Large graphic LCD display |
| Languages |
English + symbols |
| Direct Readout |
Real time data, TWA , STEL, peak data, battery voltage, date and time |
| Alarm Method |
95 Db @ 11.81 in (30 cm) buzzer and flashing red LED |
| Alarms |
Gas exceeds the limit, low battery voltage, sensor failure, low battery . |
| Alarm Setting |
Independent settings for TWA, STEL, high or low flow limits |
| Data Storage |
Built-in storage capacity for 260,000 data points(approximately 2 months with a 1 minute inveral),including date,time, serial number, user ID, detection point ID, etc. |
| Sapling interval |
Adjustable from 60 to 3600 seconds. |
| Data Communication |
Built-in Bluetooth module for real-time wireless data transmission |
| Pump type |
Built-in |
| Pump Flow Rate |
250 cc/min to 400 cc/min |
| Battery |
Rechargeable lithium-ion battery: 7.4 V or 6000 mAH |
| Operating Hours |
Continuous operation for up to 16 hours (depending on the working environment and frequency) |
| Charging Time |
8 hours for Lithium Battery |
| Temperature |
-4 °F to 122 °F (-20 ℃ to 50 ℃) |
| Size |
9.01 in x 2.04 in x 3.22 in (229 mm x 52 mm x 82 mm) |
| Weight |
1.54 lbs (700 g) (including Lithium battery) |
