Click to enlarge
GAOTek H2S Portable Gas Detector
Back to products
GAOTek Portable Alarm Gas Detector

GAOTek Hydrogen Sulfide Gas Detector

This Hydrogen Sulfide Gas Detector has temperature -4 °F to 122 °F, working humidity of 0% RH to 95% RH and 3.7 V rechargeable lithium battery.

Add to quote
SKU: GAOTek-RHSGD-109 Category:
Description

Description

Features

  • LCD dot matrix display, support Chinese and English operation
  • The gas concentration unit PPM and mg per m3 can be shifted quickly
  • Ultra-high buzzer alarm sound, higher and lower alarm values are settable
  • Data storage function, historical data can be viewed on the device
  • Rechargeable lithium polymer battery of large capacity, which ensures the
  • Strong and up scale alligator clip, convenient to take along during operation

 

Technical Specifications

Detection Principle Electrochemistry
Measure Range 0 Ppm to 50 ppm,0 ppm to 100 ppm,0 ppm to 200 ppm,0 ppm to 500 ppm,0 ppm to 1000 ppm,0 ppm to 2000 ppm,0 ppm to 5000 ppm (range is optional and customized)
Resolution 0.01 Ppm,0.1 ppm,1 ppm
Precision 3% FS
Sampling Method Diffusion (add external sampling pump if necessary)
Unit Ppm, mg per m3
Display Monochrome dot matrix 128 x 128 LCD graphic display.
 Backlight The time of the backlight is settable, and when alarm the backlight will be auto-on.
Direct Reading Gas molecular formula, concentration unit, measured value, time, battery, alarm state, data record status.
 Data Recording Storage capacity of over one hundred thousand sets, it can continue to store for 15 months with interval of 5 minutes. Interval time ranges from 10 seconds to 3600 seconds are settable. (Optional function)
Data Transmission High speed data transmission by USB, and is available for data downloading and printing after installing necessary software (optional function).
Calibration Two target point calibration, both can be set up a calibration value. Support automatic zero point calibration of all channels by one click.
Password Protection Calibration is protected by password, and the password is resettable.
Restoration: Support restoration of factory calibration, support restoration of factory parameter settings.
Alarm Type Sound and light. Higher and lower alarm point values are settable. There are three alarm statuses for selection: ON OFF or MUTE.
Battery 3.7 V Rechargeable lithium battery, with capacity of 1800 mAh, and the working time is more than 50 hours (no combustible gas), and the charging time is less than 6 hours.
Explosion-Proof Grade ExiaⅡCT4
Protection Grade: IP66
Working Humidity 0% RH to 95% RH (Non-condensing, a filter dryer is needed in environment of humidity more than 90% RH)
Housing Material ABS + PC
Working Temperature -4 °F to 122 °F (-20 ℃ to 50 ℃)
Size 6.10 In x 3.07 in x 1.37 in (155 mm x 78 mm x 35 mm)
Weight  0.66 lb (0.3 kg)