Click to enlarge
GAOTek X7 All in One 4K CCTV Camera Tester
Back to products
GAOTek Digital LCR Meter

GAOTek Inductance Capacitance and Resistance Testing Equipment Digital Bridge LCR Meter

GAOTek Inductance Capacitance and Resistance Testing Equipment Digital Bridge LCR Meter s a new generation impedance test instrument with high accuracy, wide measurement range and six-digit resolution

Add to quote
SKU: GAOTek-LCRMT-141 Category:
Description

Description

Overview

GAOTek Inductance Capacitance and Resistance Testing Equipment Digital Bridge LCR Meter s a new generation impedance test instrument with high accuracy, wide measurement range and six-digit resolution.It fulfills most low-voltage parameter measurement needs for components and materials with its basic accuracy (0.05%), wide frequency range (from 20 Hz to 500 kHz), test signal level (5 mV to 2V) and built-in DC bias source. The instrument is widely applied in microphone, resonator, inductor, ceramic capacitor, LCD, varactor and transformer etc. to analyze electrical performance and test low-ESR capacitor and high-Q inductor. The HANDLER (option), GPIB (option), LAN, RS232C and USB HOST interfaces make it easy to build an automatic component test system, communicate with the computer and record the test results.

 

Features

  • 800 x RGB x 480 7-inch TFT LCD display
  • Basic accuracy: 0.05%
  • 20 Hz to 500 kHz (ZC2829A 200kHz) test frequencies with 10mHz resolution
  • 10mV-5V test level with the resolution of 1mV
  • 4 signal source output impedance
  • 10 points list sweep function
  • 20 control settings files can be stored/loaded from the internal non-volatile memory
  • 40 additional setting files can also be stored/loaded from USB disk
  • RS232C, USB, LAN, HANDLER (option), GPIB (option) interface
  • Internet connection with other instruments via LAN

 

Technical Specifications

Warranty 1 year
Customized support OEM
Power Electronic
Product Name LCR meter
Frequency of Test Signal 20 Hz to 500 KHz
Application Electronics, etc.
Frequency 20 Hz to 200 kHz
Min. Resolution 10 mHz
Basic Accuracy 0.05 %
Power supply 220 V, 50 Hz
DC bias voltage source (option) 0 V to ± 10 V / 0 mA to ±100 mA
LCR Parameters Z, Y, C, L, X, B, R, G, D, Q, θ, DCR, Turn Ratio, Phase, LK
Test parameters of LCR 0.00001 Ω to 99.9999 MΩ
Measurement Time (≥1kHz) Fast: 32 ms;Medium: 90 ms;

Slow: 650 ms
Equivalent Circuit Series; Parallel
Range Mode Auto; Hold
Trigger Mode Internal; Manual; External; Bus
Average Times 1 to 255
Calibration Function Open, short calibration with full frequency or dot frequency, Load