Description
Overview
GAOTek Network Cable Analyzer is designed based on the electromagnetic induction method and the application of the communication principle. Contains a more user-friendly design in use. The large-screen LCD displays the signal strength, and the bars, arrows and voice prompts make it easy for the operator to determine the location of the cable underground and the point of failure. One person can complete all operations. This product can be used to find cable (live or uncharged) path and identification, but also can be used to find the buried cable fault. It can complete tasks that were only possible with the past few sets of instruments. This does not require high-voltage test equipment, AC power supply, and waveform analysis. The wiring is simple and clear, and the method of use is easy to learn.
Technical Specification
| Receiver Frequency | Low 815 Hz
Intermediate 8 kHz High 33 kHz Radio 83 kHz, 50 Hz |
| Receiver Antenna Mode | Valley method (zero value mode), crest method (peak mode), step voltage method and clamp current method (A-frame) |
| Battery Model | 6 AA alkaline batteries |
| Battery Life | Continuous work > 8 hrs
Intermittent work > 16 hrs |
| Gain Control | Manual adjustment, dynamic range of 100 dB |
| Detection Depth | Maximum not less than 16.404 ft (5 m) |
| Maximum Detection Distance | Up to 9.320 mi (15 km) |
| Depth Measurement | Up to 32.808 ft (10 m) |
| Accuracy | Low frequency ± (1% to 5%) ≤ 8.202 ft (2.5 m)
Radio frequency ± (5% to 12%) ≤ 8.202 ft (2.5 m) |
| Transmitter Working Frequency | Low frequency 815 Hz
Intermediate frequency 8 kHz High frequency 33 kHz Radio frequency 83 kHz |
| Transmitter Working Mode | Direct connection method, coupling method (caliper method), induction method |
| Matching Load | 5 Ω to 3000 Ω |
| Working Temperature | 14 °F to 131 °F (-10 °C to 55 °C) |
| Size | 27.55 in x 7.87 in x 4.33 in (70 cm x 20 cm x 11 cm) |
| Weight | 6.61 lb (3 Kg) (with battery) |