Click to enlarge
GAOTek Gloss Meter Tester
Back to products
GAOTek Portable Storage Logic Analyzer

GAOTek Portatil Logic Analyzer

This portatil logic analyzer has sampling rate range of 1 GSa/s m, eequivalent sample rate of 25 GSa/s, 100MHz of bandwidth, and record length of 40 K.

Add to quote
SKU: GAOTek-PELA-176 Category:
Description

Description

Features

  • 2 Channel Digital Oscilloscope
  • Arbitrary or Function Waveform Generator, Synchronizing Signal
  • External Trigger
  • The Keys for oscilloscope and waveform generator are separated for convenient to operate it simultaneously
  • Large and clear display 7 in (17.78 cm) 64 K color LCD display
  • Resolution (800 pixels x 480 pixels), clearer and more realistic waveform
  •  Oscilloscope: 1GSa/s Sample Rate, 200 or 100 or 70 MHz Bandwidth
  • More than 20 kinds of auto measurement functions
  • Powerful Trigger Function: Edge, Video, Pulse, Slope, Over time, Alternative
  • Arbitrary/Function Waveform Generator: 25 MHz, 12 bits resolution, 200 MHz DDS
  • Arbitrary wave or square wave or sine wave or triangle wave
  • Trapezoidal wave or pulse wave or DC is easy to simulate transducer
  • Support SD card, VGA function (optional)
  • Integrated USB Host, Support USB disk storage
  • USB interface or SD card system update

 

Technical Specification

Sample Rate Sampling Rate Range: 1 GSa/s
Equivalent Sample Rate: 25 GSa/s
Normal Normal data only
Peak Detect High-frequency and randon glith capture
Average Waveform Average, selectable 4,8,16,32,64,128
Inputs Coupling AC, DC, GND
Inpits Impendance 1 MΩ ±2% 20 pF ±3pF
Probe Attenuation 1 X, 10 X
Supported Probe Attenuation Factor 1 X, 10 X, 100 X, 100 0X
Maximum Input Voltage CAT I and CAT II: 300 VRMS (10×)
CAT III: 150 VRMS (1×).
Installation Category II: derate at 20 dB/decade above 100 kHz to 13 V peak AC at 3 MHz and above. For non-sinusoidal waveforms, peak value must be less than 450 V. Excursion above 300 V should be of less than 100 ms duration. RMS signal level including all DC components removed through AC coupling must be limited to 300 V. If these values are exceeded, damage to the oscilloscope may occur.
Sample Rate Range 1 GS/s
Waveform Interpolation (sin x)/x
Record Length 40 K
SEC/DIV Range 2 ns/div to 40s/div
Sample Rate and ±50 ppm (at over any ≥1ms time interval)
Delay Time Accuracy
Position Range  20ns/div to 80us/div; (-8div x s/div) to 40 ms; 

200us/div to 40s/div; (-8div x s/div) to 400s
Delta Time Measurement Accuracy
(Full Bandwidth)		 Single-shot, Normal mode: ± (1 sample interval +100 ppm × reading + 0.6 ns);
>16 averages: ± (1 sample interval + 100ppm × reading + 0.4ns);
Sample interval = s/div ÷ 200
Vertical Resolution 8-bit resolution, all channel sampled simultaneously
Position Range 2 mV/div to 10 V/div
Bandwidth 200 MHz
Rise Time at BNC (typical) 1.8 ns or 3.5 ns or 5 ns