GAOTek RF Signal Generator
GAOTek RF Signal Generator finds the amplitude and frequency of the spectral components of the analyzed process. It can process signals from all widely used technologies: Wi-Fi, 2G, 3G, 4G, LTE, CDMA, DCS, GSM, GPRS, GLONASS, etc.
Description
Overview
GAOTek RF Signal Generator finds the amplitude and frequency of the spectral components of the analyzed process. It can process signals from all widely used technologies: Wi-Fi, 2G, 3G, 4G, LTE, CDMA, DCS, GSM, GPRS, GLONASS, etc. It is a simple portable spectrum analyzer and signal source designed to display the signal spectrum from 35 MHz to 6200 MHz Another important feature is its tracking generator, which makes it possible to measure the frequency response of passive or active devices (such as filters or amplifiers). The software allows measurement of SWR and return loss modules. This requires an external directional coupler and a set of calibration measures.
Features
- Display frequency range: 35 Hz to 6200 MHz
- Measuring frequency range: 35 Hz to 4500 MHz
- Dynamic range of 35 Hz to 3000 MHz: 75 dB
- Dynamic range of 3000 MHz to 4500 MHz: 70 dB
- Maximum span: 6165 MHz
- Bandwidth: 200 kHz, fixed
- View the scanning speed of the frequency band above 100MHz: 700MHz/sec
- Sweep 100 MHz: < 0.25 seconds
- Noise floor up to 3000 MHz: < -90dBm
- Noise floor 3000 MHz to 4500 MHz: <-85dBm
- Noise floor 4500 MHz to 6200 MHz: <-80dBm
- Wave impedance: 50 ohms
- Standing wave ratio in the working frequency range: <1.5
Technical Specifications
| Frequency Range | 35 MHz to 4400 MHz |
| Network | GPRS, Wi-Fi, 4G |
| Display Resolution | 320 x 240 pixels |
| Screen Diagonal | 3.2 in (8.12 cm) |
| Measurement Accuracy | 2 dB within 70 dB to 75 dB |
| Minimum Frequency Step | 35 MHz |
| Phase Noise At 100 kHz Offset | -90 dB/Hz |
| Phase Noise At 1 MHz Offset | -115 dB/Hz |
| Screen Type | Color resistive touch screen |
| Dimension | 5.9 in x 3 in x 0.9 in (150 mm x 75 mm x 23 mm) |
| Weight | 0.8 lb (380 g) |