GAOTek Signal Function Generator
This Signal Function Generator has an output amplitude maximum of ±10 V (P tot P), Output impedance of 50 ohms and a power supply DC 3.5 V to 10 V.
Description
Description
Features
- Sine wave of 1 Hz to 500 kHz
- flat amplitude to 200 kHz
- Other waveforms of 1 Hz to 20 kHz, adjustable frequency upper limit
- Distortion and jitter requirements impact frequency usability
- Output waveform: sine wave, square wave, triangle wave etc.
Technical Specifications
| Frequency range | sine wave 1 Hz to500 kHz (where the output amplitude is flat to 200 kHz, and the output amplitude will decrease as the frequency increases), other waveforms 1 Hz to 20 kHz (but the upper limit of the adjustable frequency is not limited, if the requirements for distortion and shaking are not high, and the frequency of use can be further increased). |
| Resolution | 1 Hz |
| Output waveform | sine wave, square wave, triangle wave, forward sawtooth wave, reverse sawtooth wave. |
| Sine wave distortion | <1% below 1 kHz, <0.5% at 1 kHz and above. |
| Output amplitude | maximum ±10 V (P to P). |
| Output impedance | 50 ohms. |
| DC offset | maximum ±10 V, with shutdown function. |
| Power supply | DC 3.5 to 10 V. It is recommended to choose DC 5 V when using the adapter, and 3.7 V lithium battery when the battery is used for power supply. |
| Dimensions | 4.9 in x 3.1 in x 1.3 in (125 mm x 80 mm x 32 mm) |
| Weight (including accessories) | 0.44 Ib (0.2 kg) |