GAOTek Vibration Meter
GAOTek vibration meter Rugged and reliable, this portable multifunction vibration meter checks bearings and overall vibrations.
Description
Overview
GAOTek vibration meter Rugged and reliable, this portable multifunction vibration meter checks bearings and overall vibrations. Get quantifiable information on the overall health of motors and other rotating equipment with this vibration screening device that features the powerful Fluke Connect software. Innovative sensor design minimizes measurement variations caused by device angle or contact pressure Make go or no-go maintenance decisions with confidence. The Fluke 805 FC Vibration Meter is the most reliable vibration screening device available for frontline mechanical troubleshooting teams that need repeatable, severity-scaled readings of overall vibration and bearing condition.
Features
- Innovative sensor design minimizes measurement variations caused by device angle
- Consistent data quality at both low and high frequency ranges
- Four-level severity scale assesses urgency of problems for overall vibration and bearing condition
- Exportable data via USB
- Trending in Microsoft Excel using pre-built templates
- Overall vibration measurement (10 Hz to 1,000 Hz) for acceleration
Â
Technical Specification
| Low Frequency Range | 10 Hz to 1000 Hz |
| High Frequency Range | 4000 Hz to 20,000 Hz |
| Severity Levels | Good, satisfactory, unsatisfactory, unacceptable |
| Vibration Limit | 50 g peak |
| A/D Converter | 16-bit |
| Signal to Noise Ratio | 80 dB |
| Sampling Rate | Low frequency: 20,000 Hz High frequency: 80,000 Hz |
| Real Time Clock Backup Coin battery | |
| Sensitivity | 100 mV g ±10% |
| Low Frequency Range | 10 Hz to 1000 Hz |
| High Frequency Range | 4000 Hz to 20,000 Hz |
| Accuracy | At 100 Hz ±5% of measured value |
| Accuracy | 35.6 °F (2 °C) |
| Focal Length | Fixed, at 1.49 in (3.8 cm) |
| Frequency Range | 10 Hz to 1000 Hz |
| Bias Voltage | 20 V to 22 V DC |
| Range | -4 °F to 392 °F (-20 °C to 200 °C) |