Click to enlarge
GAOTek Tri-Channel Vibration Meter
Back to products
GAOTek Ultrasonic Concrete Analyze Detector

GAOTek Vibration Meter

GAOTek vibration meter is rugged and reliable, this portable multifunction vibration meter checks bearings and overall vibrations.

Add to quote
SKU: GAOTek-HFVM-205 Category:
Description

Description

Overview

GAOTek vibration meter is rugged and reliable, this portable multifunction vibration meter checks bearings and overall vibrations. Get quantifiable information on the overall health of motors and other rotating equipment with this vibration screening device that features the powerful Fluke Connect software.

 

Features

  • Innovative sensor design ensures consistent data quality
  • Four-level severity scale assesses urgency of vibration issues
  • USB exportable data; trending in Microsoft Excel
  • Units: Acceleration: g, m/sec2
  • Velocity: in/sec, mm/sec
  • Displacement: mils, mm
  • Crest Factor+ for reliable bearing assessment
  • Colored lighting system and on-screen comments guide measurements
  • Temperature measurement with Spot IR Sensor
  • On-board memory for up to 3,500 measurements
  • Audio output for listening to bearing tones
  • External accelerometer support for hard-to-reach locations
  • Flashlight for dark area measurements
  • Large, high-resolution screen for easy navigation and viewing

 

Technical Specifications

Low Frequency Range (Overall
Measurement)		 10 Hz to 1000 Hz
High Frequency Range (CF+ Measurement) 4000 Hz to 20,000 Hz
Severity Levels Good, satisfactory, unsatisfactory, unacceptable
Vibration Limit 0.11 lb (50 g) peak (0.22 lb per 100 g peak-peak)
A or D Converter 16-bit
Signal to Noise Ratio 80 dB
Sampling Rate Low frequency 20,000 Hz
High frequency 80,000 Hz
Real Time Clock Backup Coin battery
Sensitivity 100 mV lb ±10%
Measurement Range 0.022 lb to 0.11 lb (0.01 g to 50 g)
Low Frequency Range (Overall Measurement) 10 Hz to 1000 Hz
High Frequency Range 4000 Hz to 20,000 Hz
Resolution 0.01 g
Accuracy At 100 Hz ±5% of measured value
Focal Length Fixed, at 1.5 in (3.8 cm)
Frequency Range 10 Hz to 1000 Hz
Bias Voltage(To Supply Power) 20 V to 22 V DC
Bias Current (To Supply Power) Maximum 5 mA
Accuracy ±35.6 °F (2 °C)
Range -4 °F to 392 °F (-20 °C to 200 °C)