Click to enlarge
GAOTek Single Mode Fiber Optic XDSL Tester
Back to products
GAOTek Fiber Optic XDSL Tester

GAOTek XDSL Line Test Equipment

This xDSL Line Test Equipment has dc voltage of -400 v to 400 v, the ac voltage of 0 v to 290 v, and wavelength range of 800 nm to 1700 nm.

Add to quote
SKU: GAOTek-XDSLT-183 Category:
Description

Description

Features

  • QUALITY ASSURANCE
  • 320 X 480 3.5 in (8.89 cm) LCD
  • Test objects: ADSL, ADSL2, ADSL2+, READSL, VDSL2
  • DURABLE
  • Fast Copper tests with DMM (ACV, DCV, Loop
  • Insulation Resistance, Capacitance, Distance)
  • Support VLAN, Vectoring, Compliant with all known DSLAMS
  • WIDE RANGE
  • Supports Modem emulation and simulating login to Interne
  • Supports ISP login (username or password)
  • IP Ping test (WAN PING Test, LAN PING Test)
  • Rechargeable Li-ion Battery
  • Support optical power meter, VFL function
  • Support cable tracing, check line sequence, landline telephone function
  • Support cable fault locator (TDR) function

 

Technical Specification

Standards ITU G.994.1 (G. hs), ITU G.992.5, ITU G.992.5 Annex L. The max distance which can be connected is mi (6.5 km), Be compatible with ADSL, ADSL2 and READSL.
Attenuation 0 dB to 63.5 dB
Noise margin 0 dB to 32 dB
Upstream Channel Rate (interweaved or fast mode) 0 Mbps to 1.2 Mbps
Downstream Channel Rate (interweaved or fast mode) 0 Mbps to 24 Mbps
The modulating bits in the DMT sub-channel 0 to 15 and each sub-channels’ frequency points
The number of error codes CRC, HEC, FEC, NCD, OCD
Standards ITU G.993.2 (VDSL2). Be compatible with ADSL2+, ADSL standard.
Upstream Channel Rate (interweaved or fast mode) 0 M to 100 M
Downstream Channel Rate (interweaved or fast mode) 0 M to 100 M
The modulating bits in the DMT sub-channel 0 to 15 and each sub-channels’ frequency points
The number of error codes CRC, HEC, FEC, NCD, OCD
Support profiles Profile 8 a, 8 b, 8 c, 8 d, 12 a, 12 b, 17 a, 30 a (optional), 35 b (optional)
DC Voltage -400 V to 400 V; Resolution: 0.1 V
AC Voltage 0 V to 290 V
Capacitance 0 nF to 1000 nF; Accuracy: 0 nF to 10 nF: ±2 nF, 10 nF to 1000 nF: ±2% ± 2 nF
Loop Resistance 0 KΩ to 20KΩ; Accuracy: 0 KΩ to 100 KΩ: ±3 % ± 4 Ω, 100 Ω to 500 Ω: ±3%, 500 KΩ to 20 KΩ: ±2%
Insulation Resistance 0 to 50 MΩ; Accuracy: 0 m to 1.0M: ± 0.1 MΩ, 1.0 M to 30 M: ±10% ±0.5 MΩ
Test Range 2.4 mi (4 km) (4.9 mi (8km) is optional)
Highest resolution 3.2 ft (1 m)
Power consumption 1 W
VOP Adjusting range 0.06 mi or 0.18 mi (100 m or us to 300 m or us)
Distance test accuracy 3.2 ft (1 m)
Pulse test voltage range 30 V
Test cable type Network cable, twisted pair cable, telephone line, USB cable, coaxial cable.
Line status test Determine open or short circuit
Voltage polarity detection Positive and negative of DC voltage
Distance of signal transmission No less than 1.8 mi (3 km)
DC Voltage No more than 48 V
Wavelength range 800 nm to 1700 nm
Photo sensing material In GaAs
Power test range -70 dBm to +10 or -50 dBm to +26 dBm
Error range ±5%
Display distinguishability Linear display: 0.1%; logarithmic display: 0.01 dBm
 Adapters 0.09 in (2.5 mm) universal adapter
VFL FP-LD
Wavelength 650 nm ± 20 nm
Output power 5 mw (10 mw or 20 mw optional)
Connector 0.09 in (2.5 mm) universal adapter
Working mode CW or 2 Hz modulation
Applicable fiber SM or MM
Single gross weight 3.3 lb (1.5 kg)