Description
Overview
Key Features
- Compact and durable, specialized for outdoor field tests.
- Fast boot-up technology.
- Support full-duplex 10/100/1000 Mbps Ethernet data stream.
- Support RFC2544 (Includes: Throughput, Frame loss, Back-to-back and Latency).
- Support Y.1564 (Optional)
- Support RFC3393.
- Support L1/L2/L3/L4 BERT test.
- Support to generate 8 data streams in maximum (MAC address, VLAN label, MPLS, IPV4/IPV6 address, Payload, and Bandwidth).
- Support to set flow priority according to CoS and ToS/DSCP.
- Support filter and package capture online.
- Support to verify SLA automatically by RFC2544 and Y.1564.
- Support dual-port through function.
- Support SDT (Service disruption test).
- Support 3-layer CoS configuration to verify Metro Ethernet service.
- Support to display test results graphically, easier to view.
Applications
- Specialized for One Gigabit Ethernet installation, operation, maintenance, and troubleshooting, or IP service.
- RFC2544 Test, Network Configuration Test.
- Performance Test.
- 1564 New Standard for Ethernet Test (Optional).
Technical Specifications
| User Interface | |
| Screen | 3.5 inch TFT Touch Screen (320 x 240) |
| Other Interface | |
| USB | · USB2.0, A type, 1 · USB2.0 Mini B type, 1 |
| Ethernet | 10/100 Base-T, RJ45 |
| Storage | 128M |
| Ethernet | |
| Port | · Optical interface: 2 ports,100/1000M Base-X
· Electrical interface: 2 ports, 10/100/1000M Base-T User-selectable optical module: 850nm, 1310nm, 1550nm. |
| Ethernet Feature | Auto-negotiation, full and half duplex, flow control |
| Configuration | Monitor/generate, pass-through |
| Encapsulation | Ethernet type II, IEEE802.3 with 802.2, IEEE802.3 with SNAP |
| Configuration, Monitoring, and Generation | |
| Traffic Generation | · Variable line rate traffic generation, up to full line rate
· Traffic generate mode: continuous, burst, ramp, n-frame, n-burst, n-ramp · Adjustable frame size: 38 bytes to 16000 bytes · Frame size: constant, iMax, random · User-defined traffic mix of unicast and broadcast frames · Fixed or increment MAC/IP identifier · User programmable DSCP/TOS byte · Configurable IP and Ethernet source and destination addresses (support IPv4 and IPv6 addressing) · User programmable TCP/UDP address · Generate pause frames, respond to pause frames · Answer incoming ARP, ping requests (ON/OFF) |
| Stacked VLAN | · Up to 3 user-settable VLAN tags.
· Parameters per VLAN tag: · Ethernet type II 0x8100 (802.1Q), 0x88a8 (802.1ad), 0x9100, 0x9200, 0x9300 · User-defined VLAN ID, CFI, VLAN priority. |
| Multi stream | Number of streams: up to 8 streams per port can be activated. |
| Error Injection | FCS, IP check sum error, CRC4 error, bit error |
| Alarm generation | No link |
| Result, Monitoring and Generation | |
| Status | · Link status, interface type, jabber detected, frames present, MPLS/VLAN, speed, full or half duplex, signal present, bit rate of incoming Ethernet signal, auto negotiation complete.
· Link partner abilities: speed/duplex. · Indicators of utilization, throughput, errored frames. · Signal level indication for optical Ethernet interfaces. |
| Performance Statistics | Utilization, throughput, frame rate |
| Frame Statistics | · Total frames, total testing frames, total not testing frames, unicast/multicast/broadcast frames, number of pause frames.
· Total VLAN frames. · Total MPLS frames. · Total errored framed, number of oversized, normal, and runt frame, number of FCS errored |
| Frame Distribution Statistics | · Total valid/frames, <64, 64-127, 128-511, 512-1023, 1024-1518, >1518. |
| Multi stream | Display information per steam:
· Frame loss count/rate, throughput, latency, packet jitter, frames and bytes received and transmitted;
|
| Transmit Statistics | Total frames, unicast/multicast/broadcast; |
| Filter | Filter condition support:
· Source and destination MAC/IP, IPv6, VLAN ID and VLAN Priority, MPLS, IP TOS, TCP/UDP source and destination port, Ethernet type and IP protocol. |
| BER Test and Service Disruption Test | |
| BER Test | · Generation and detection of test pattern, count of errors in received test pattern.
· Pattern generation: layer 1 to layer 4. · Frame loss count and frame loss seconds. · BER measurement results. · Test pattern: PRBS9, PRBS11, PRBS15, PRBS20, PRBS23, PRBS31, CRPRJ, JTPAT, SPAT, 32bits user defined. |
| Error Injection | FCS, IP check sum error, UDP/TCP check sum error, BIT error. |
| Service Disruption Test | Service disruption test activated as part of BER test:
· Max/avg service disruption test, resolution: 0.1 μs · Number of service disruption |
| Loopback and Pass Through | |
| Loopback Test | · Layer 1 to layer 4 loopback test.
· Advanced loopback test: · Packet loss setting: percentage, packet count, time. · Loopback drop enable: protocol loss, protocol pass, control, CRC error, IP/TCP/UDP error |
| Pass Through Test | · Pass through monitoring function between 2× 1GE electrical or 2×1GE optical ports
· Advanced pass through test · Packet loss setting: percentage, packet count, time · Pass through drop enable: protocol loss, protocol pass, control, CRC error, IP/TCP/UDP error |
| RFC3393 | |
| Jitter Test | · G.711, G.723.1, G.729 and so on VoIP packet jitter test
· Jitter result: hits, min, max, current, average |
| RFC2544 | |
| RFC2544 Test | · Switch/Router test and single ended network test mode: Throughput, frame loss, latency, back-to-back
· End-to-End network test mode (2 units in local-remote setup): Throughput, frame loss, back-to-back |
| Service Activation Test (Y.1564) | |
| Service Activation Test | ITU-T Y.1564 service activation test:
· Up to 8 services per port · Colour-aware and non-colour-aware in combinations. · Test modes: one-way (uni-or bi-directional, symmetrical, or asymmetrical), round-trip · Verification against service acceptance criteria: information rate, frame transfer delay, frame delay variation, frame loss rate, availability. |
| Service Configuration Test | · Subtest for: CIR, EIR, traffic policing
· Step duration: 1-60s (user define) · Number of steps: 1 to 4. · Result: pass/fail indication, IR (min/avg/max), FL (Count/FLR), FTD, FDV (min/avg/max (during measurement)). |
| Service Performance Test | · All services tested simultaneously at CIR.
· Duration: 15 min, 2 hours, 24 hours, or user defined. · Result: pass/fail indication, IR (min/avg/max), FL (count/FLR), FTD, FDV (min/avg/max (during measurement)). |
| Remote Smart Loopback Test | |
| Remote Smart Loopback | · Use as local unit control another remote unit for RFC2544 and Y.1564 bi-directional testing.
· Support layer 1 to layer 4 smart loopback test. |
| Advanced IP Tools | |
| PING | For connectivity and configuration check:
· Round trip time (RTT) · Support IPv4, TTL, URL |
| Trace Route | Trace IP route over IP network:
Information per hop: PING time, number of ping timeouts. |
| VCT Cable Test | Use for CAT5 cable connectivity check:
· Status: pass/fail · Fault location · Channel · Polarity · Pair Skew |
| Flow Control | Flow control Time, us:
· Pause time: total, last, max, min · Pause frame count: TX, RX |
| FTP Upload/
Download |
Use for FTP server and client emulation:
• Support IPv4 and URL • Username/password • File upload/download • Result: pass/fail indication, upload/download time display |
| HTTP | WEB access:
· Support IPv4 and URL · HTTP access pass/fail |
| Advanced PING
(Topology) |
Advance/fast PING, PING segments of the IP one by one in one time:
· IP address range: start, end · Send count · Timeout (ms) · Status: pass/fail indication |
| MPLS | |
| Number of MPLS Header | Up to 3 MPLS header set by user |
| Parameter per MPLS Header | User defined label, EXP and TLL fields in each MPLS header |
| Statistics | MPLS frame count |
| Ethernet Frame Capture | |
| Buffer Size | · 16 Kbytes
· When capture buffer full: stop |
| Capture Frame Slicing | Can capture frame length by user defined. |
| Capture Data | CAP format for display in Wireshark. |
| Battery and Power Supply | |
| Battery | · Rechargeable Li-Ion battery
· Working time: 8 hours · Charging time: <3 hours (typical: 25 °C) |
| Power Source | · Input: 100-240 V AC, 50-60 Hz, 2A
· Output: 19V DC, 4A |
| Physical Specifications | |
| Size (H×W×D) | 3.14 in x 5.31 in x 9.84 in (80 mm x 135 mm x 250 mm) |
| Weight | 2.4 lbs (1.1Kg) |
| Temperature | · Operating: 14 °F to 122 °F (-10 °C to 50 °C)
· Storage: -40 °F to 178 °F (-40 °C to 70 °C) |
| Relative Humidity | 0% to 95% (non-condensing) |
| EMC | · EN55022/CIPSR22
· EN61000-3-2 · EN55024 |
Packaging List
| Module | Description | Quantity |
| GAOTek-ENET-101 | ·Handheld Gigabit Ethernet Tester
·Dual 10/100/1000M Base-T electrical interfaces ·Dual 1000M Base-X optical interfaces ·Layer 1 to Layer 4 BERT test ·Up to 8 streams generation and analysis with MAC/VLAN/IP/TCP/UDP ·RFC2544 standard test with Throughput, Latency, Frame Loss, Back-to-Back ·Layer 1 to Layer 4 loopback and smart loopback test ·Enable to drop data packet under loopback mode ·Up to 1000M streams generation with 3 Layer VLAN ·Ping, Trace Route, FTP Download/Upload, and HTTP tools ·Ethernet service disruption test; ·Packet capture and analysis to 1000M rate ·Cable test with CAT5 length and fault measurement ·Enable to generate frame with random length ·Enable to generate data streams with increment, MAC and IP ·Bi-directional test ·Layer 1 bandwidth statistics ·Remote control by PC |
1 |
| Module | Description | Quantity |
| Accessories | LC/PC to LC/PC full-duplex single-mode fiber (3 m) | 1 |
| CAT5 cable (3 m) | 1 | |
| 1.25G 1310nm 15Km LC SFP optical modules | 2 | |
| SFP optical port dust proof cap – black – rubber | 2 | |
| RJ45 electrical port dust proof cap – black – rubber | 2 | |
| 100 V – 240 V input and 15 V output AC/DC power adapter | 1 | |
| User manual disc and remote control software | 1 | |
| Battery | 1 | |
| Factory Test Report | 1 | |
| Calibration Certificate | 1 | |
| One Year Warranty Service | 1 | |
| 9cm Stylus Pen | 1 |
Optional Accessories
| Optional Software | |
| 1 | Y.1564 standard service configuration and performance test for SLA QoS with CIR/EIR/Traffic Dropped for GE |
| 2 | Bi-directional Y.1564 test |
| 3 | IPv6 feature, the test interface can set IPv6 address and also can generate stream with IPv6 |
| 4 | Traffic scan according with destination MAC/IP, source MAC/IP, 3 Layer VLAN, 3 Layer MPLS in-service test |
| 5 | Advance auto-negotiation, can set the remote equipment auto-negotiation the speed and duplex as you want |
| 6 | Advance/Fast PING, PING segments of the IP one by one in one time |
| 7 | Up to 1000 M streams generation with 3 Layer MPLS label |
| 8 | Enhancement RFC2544 test, support different upstream and downstream rates setup for Throughput, Frame Loss and Back-to- Back test |
| 9 | Dual 100M Base-X optical ports |
| Optional Hardware | |
| 1 | Lithium polymer rechargeable battery |
| 2 | Two years extended warranty service |
| 3 | 1.25G-850nm-550m-MM-LC-SFP-DDM |
| 4 | 1.25G-1310nm-15km-SM-LC-SFP-DDM |
| 5 | 1.25G-1550nm-40km-SM-LC-SFP-DDM |