Description
Features
- The 1734-AENTR supports TCP or UDP or IP protocol with physical connection
- This adapter supports 10 or 100 Mbit transmission speed
- This module is configured using RSLogix5000 or Studio5000 Logix designer software
- Selection of software mainly depends on the firmware of existing modules
- RSLinx software may also be used to detect and configure this module.
Technical Specifications
| Series | Point I/O |
| Module Type | Ethernet or ip adapter module |
| Input Voltage Rating | 24 volts dc |
| Enclosure Rating | Open |
| Ethernet Communication Rate | 10 or 100 Mbits per s, half or full-duples |
| Maximum Power Consumption | 10.4 Watts at 28.8 Volts DC |
| Input Overvoltage Protection | Reverse polarity protected |
| Isolation Voltage | 50 volts (continuous) |
| Maximum Expansion I/O Capacity | 63 modules, 31 direct connections |
| Operating Temperature | -4 °F to 140 °F (-20°C to 60°C) |
| Weight | 0.62 lb |