Description
Overview
GAOTek Serial Port Wireless Wifi Module is an embedded serial port to Ethernet module based on series launched .Integrating an optimized TCP/IP protocol stack, it makes it easy for users to accomplish the network access of embedded devices and greatly reduces the development time cost. Moreover, the module is designed to be compatible with half pads and through-hole connectors. As the board width of it is the generic width, the module can be directly welded to boards, or connectors, or even breadboards, which is convenient for users to apply in different scenes. The series IC is the SOC integrated with 2.4 GHz Wi-Fi and BT dual modes,with ultra-high RF performance, stability, versatility, reliability, and ultra-low power consumption.
Features
- Support wired network access
- Support user secondary development
Technical Specifications
Supplier Type | Ethernet Wi-Fi Module |
Supply Voltage | 3.3 V to 5 V |
MCU | Dual-core Xtensa 32-bit LX6 |
Integrated SPI flash | 3.32 Mbit / SRAM 520 KB |
Software encryption | AES/RSA/ECC/SHA |
Network protocol | IPv4, TCP/UDP |
Serial port baud rate | 80 to 5000000 |
Operating Temperature Range | -40 °F to 185 °F (-40 °C to 85 °C) |
Support | User secondary development |
Frequency Range | 2.4 GHz to 2.5 GHz |
Operating Current (Average) | 80 mA |
Wi-Fi Protocols | 802.11 b/g/n/e/i(802.11n,up to 150 Mbps)A-MPDU and A-MSDU aggregation, 0.4_ s guard interval support |
Wi-Fi Frequency range | 2.4 GHz to 2.5 GHz |
Protocols | BT v4.2 BR/EDR and BLE standards |
BT Radio | NZIF receiver with -97 dBm sensitivity |
Network port specifications | RJ 45, 10/100 Mbps, Cross-direct connection adaptive Serial baud rate |
On-board flash | 32 Mbit |
Operating voltage | 5 V or 3.3 V |
Operating current | Average: 80 mA |
Supply current | Minimum: 500 mA |
Ambient temperature | Normal temperature |
Wi-Fi mode | Station/softAP/SoftAP+station/P2P |
Firmware update | Remote OTA upgrade via network |
Networking protocol | IPv4、TCP/UDP |
Transparent transmission modes | TCP Server/TCP Client/UDP Server/UDP Client |
User configurations | AT+ commands set |
Click Here to Download Technical
Documentation (User Manual or Instruction Manual)