Description
Key Features
- Supports both CW and 2 Hz modulation work mode
- Use of special laser end design to avoid damage when dropping on the floor
- Long working hours: use of effective laser drive circuit ensures that 1 mW/650 nm locator can work for more than 10 hours continuously
- Stable power output: use of special laser driver circuit ensures stable power output in the low battery
- 2.5 mm universal adapter: uses 2.5 mm universal adapter, can match SC/LC adapters
Technical Specifications
| Wavelength | 650 nm ± 10 nm |
| Light Source | FP-LD laser |
| Output Power | 1 mw, 10 mw, 20 mw, 25 mW, 30 mW (optional) |
| Connector | 2.5 mm universal adapter |
| Working Mode | CW or 2 Hz modulation |
| Operating Temperature | 32 °F～140 °F (0 °C～60 °C) |
| Storage Temperature | -13 °F～158 °F (-25 °C～70 °C) |
| Power | 2 pcs AA battery |
| Working hours | ≥10 hours |
| Size | 6.88 in × 1.02 in × 1.02 in (175 mm × 26 mm × 26 mm) |
| Weight | 0.35 lbs (160 g) |
Additional Information
Applications
This Visual Fault Locator with Long Range (Long Battery) is used in:
- Finding fiber fracture and bending fault location
- Test Lab of optical fibers
- End to end fiber identification
- Maintenance of telecom system
- CATV system to trace fiber loss testing
- Fiber routing and continuity checking in optical networks
- Optical examination and fault locating for both single mode and multimode optical fibers.
 Operation
Visual Fault Locator
Â
- Please properly install the battery or it will cause the device to not work and it may get damaged.
- Switch in middle side for power off, switch up for CW output, switch down for glint output.
Â