Description
Overview
GAOTek fiber optic microscopes can enlarge fiber end by 200x,400x or 80x magnification. Baseline is according with end face diameter measured on 8 in (20.32 cm) screen. Then an enlarged picture of the fiber end face is shown on display through video signal. Finally, fiber end defects can be easily found at a glance on the display. GAOTek fiber optic microscopes start working when the power is on. No cables between display and microscope makes it easy to manipulate, fast to work and most of all greatly enhances work efficiency GAOTek fiber optic microscopes can quickly check blemish, scratch and chipping etc. defects on fiber jumper and fiber ferrule. Operators just need to visually inspect the fiber on the LCD screen instead of reviewing it. Therefore, no harm to toman eyes. As is well known, harm is caused by laser fiber when operators directly view fiber end.
Features
- Photograph
- Image save
- Image delete
- X/Y axis adjustable
- External monitor connection
- External signal input
- External USB signal input
- External AV signal input
- Brightness adjustable
- Contrast adjustable
- Saturation adjustable
- Clock
- External SD card connection
Technical Specifications
| Magnification | 50 x, 80 x, 200 x, 400 x |
| X Y Axis adjustable | Y |
| Image input or output format | Analog PAL |
| CCD resolution | 0.33 in (0.83 cm)Â 420 lines |
| Image output port | RCA |
| Image input port | RCA |
| Focus mode | Manual |
| Power dissipation | 3 W |
| Working temperature | 50 °F to 122 °F (+10 °C to +50 °C) |
| Storage temperature | 32 °F to 131 °F (0 °C to +55 °C) |
| Input port | Y |
| Display | 8 in (20.32 cm) TFT 800 x 600 PIX |
| Power supply | DC 12 |
| Size | 11.02 in x 7.87 in x 6.69 in (280 mm x 200 mm x 170 mm) |
| Weight | 8.81 lb (4 kg) |
Â