Click to enlarge
GAOTek Bluetooth Car Paint Color Analyser
Back to products
GAOTek Bluetooth Chroma Meter Color Analyser

GAOTek Bluetooth Spectrophotometer Color Analyser

GAOTek bluetooth spectrophotometer color analyser is developed using built-in photodiode array (double 20 groups) sensors, imported whiteboard, while considering the measurement speed and convenience of operation.

Add to quote
SKU: GAOTek-BCA-221 Category:
Description

Description

Overview

GAOTek bluetooth spectrophotometer color analyser is developed using built-in photodiode array (double 20 groups) sensors, imported whiteboard, while considering the measurement speed and convenience of operation. It is used for precise color measurement and quality control in plastic electronics, paint and ink, textile and garment printing and dyeing, printing, ceramics and other industries, and for fluorescent sample measurement. The repeatability delta E x AB of spectrophotometer is easily controlled within 0.03, and the inter instrument error delta E x AB is controlled within 0.2, to make the measurement more accurate. And the test data can be used for accurate color analysis and transmission in the laboratory.

 

Features

  • Large area photodiode array (dual 20 arrays) sensor
  • Adopt D 8 structure and SCI or SCE mode
  • Combination of 400-700nm full spectrum LED and UV light source
  • Camera positioning can clearly observe the measured area
  • Non-contact automatic white calibration
  • Place the base safely to ensure that the whiteboard is not dirty
  • Offer 8 kinds of color measurement space
  • Offer 41 kinds of observation light source

 

Technical Specifications

 

Optical Geometry D 8 (diffused illumination, 8-degree viewing angle) SCI (specular component included)/SCE (specular component excluded), excluded UV light source
Integrating Sphere Size 1.5 in (40 mm)
Light Source Combined full spectrum LED light source
Spectrophotometric Mode Flat Grating
Sensor Silicon photodiode array (double row 20 groups)
Wavelength Range 400 nm to 700 nm
Wavelength Interval 10 nm
Measured Reflectance Range 0% to 200%
Measuring Aperture One aperture 0.3 in or 0.1 in (8 mm or 4 mm)
Color Space XYZ, Yxy, LCh, LUV, RGB, βxy, Munsell(C/2)
Observer Angle 2° or 10°
Displayed Data Spectrogram or Values, Samples Chromaticity Values, Color Difference Values or Graph, PASS or FAIL Result, Color simulation, Color Offset
Measuring Time About 1.5 seconds
Repeatability Chromaticity value within ΔE x ab 0.03 (When a white calibration plate is measured 30 times at 5 second intervals after white calibration) Standard deviation within 0.1% (400 nm to 700 nm within 0.2%)
Inter-instrument Error Within E x ab 0.2
Display Resolution 0.01%
Measurement Mode Single Measurement, Average Measurement (2 times to 99 times)
Locating Method Camera Locating, stabilizer cross position
Battery Li-ion battery, 8800 measurements within 8 hours
Illuminant Life Span 10 years, more than 1.5 million times measurements
Displayed Data 3.5 in (8.8 cm) TFT color LCD, Capacitive Touch Screen
Data Port USB, bluetooth
Data Storage Standard 1000 Pcs, Sample 20000 Pcs, APP or PC mass storage
Operating Environment 32 °F to 104°F (0 °C to 40 °C), 0% RH to 85% RH (no condensing)
Altitude <1.2 mi (2000 m)
Storage Environment -4 °F to 122°F (-20 °C to 50 °C), 0% RH to 85% RH (no condensing)
Dimension 5.0 in x 2.9 in x 8.5 in (129 mm x 76 mm x 217 mm)
Weight Approximately 21.1 oz (600 g)