Click to enlarge
GAOTek Noise Level Meter
Back to products
GAOTek Continuous Monitoring Chlorine Gas Analyzer

GAOTek Chlorine Meter Tester

GAOTek chlorine meter pro is designed and developed based on the DPD colorimetric method.

Add to quote
SKU: GAOTek-CGA-105 Category:
Description

Description

Overview

GAOTek chlorine meter pro is designed and developed based on the DPD colorimetric method. It can directly measure residual and total chlorine in water, which is easy to use, accurate and reliable. This method conforms to the national standards for determining relevant indicators in the field of water quality analysis and is widely used in the determination of residual chlorine and total chlorine in samples such as drinking water, landscape water, medical wastewater, swimming pool water, and disinfectants.

 

Features

  • Using 515 nm LED light source, long life, and high precision
  • Using high-performance low-power single-chip technology
  • Good human-machine interface
  • Support calibration-free measurement
  • Direct reading of measurement results, and automatic locking of readings
  • Support single-point and multi-point calibration
  • Support users to edit the calibration curve
  • Supports 200 sets of test data for each of the two parameters
  • In line with GLP specifications
  • Support USB communication, support to connect to PC for data collection
  • Support battery power supply and USB power supply
  • Support power management function
  • Can be set to automatically turn off the light source and automatic shutdown
  • IP65 protection level, good waterproof, and dustproof performance
  • Support firmware upgrade, allowing function expansion and application expansion

 

Technical Specifications

Measuring range Residual chlorine 0 mg / L to 5 mg / L
total chlorine 0 mg / L to 5 mg / L
Resolution Concentration 0.001 mg / L
Absorbance 0.001 ABS
Indication error Measuring range ≤1 mg / L ±0.05 mg / L
Repeatability Measuring range >1 mg / L ±5%
The detection limit ≤2.0%
light source ≤0.02 mg / L
wavelength Light Emitting Diode (LED)
calibration 515 nm
Data storage Support up to 5 points calibration
Colorimetric cell 200 groups of test results
Power supply 0.62 in (16 mm) diameter colorimetric tube
Protection level 4 alkaline batteries (1.5 V), USB powered
Single package size 19.69 in x 16.54 in x 9.06 in (500 mm x 420 mm x 230 mm)
Single gross weight 17.64 lb (8 kg)