Click to enlarge
8 Ports 10G GPON OLT
Back to products
GAOTek Underground Cable Locator

GAOTek DC System Ground Fault Detector

GAOTek DC system ground fault detector can be applied to dc systems of any voltage level, equipped with a high-precision detection clamp table, which greatly improves the detection range and anti-interference ability through efficient processing of multiple signals.

Add to quote
SKU: GAOTek-WGFL-213 Category:
Description

Description

Overview

GAOTek DC system ground fault detector can be applied to dc systems of any voltage level, equipped with a high-precision detection clamp table, which greatly improves the detection range and anti-interference ability through efficient processing of multiple signals. By using excellent algorithm and advanced fuzzy control calculation theory, the advantages of the insulation branch detected are expressed in numerical form, which fully reflects the advantages of artificial intelligence. In addition, they have accurate judgment of the location of the receiving site. Each test can indicate the location and direction of the receiving site. This instrument is used to find the exact location of dc system connection of power plant and substation under the condition of continuous electricity. Various types of ground fault can quickly find out the location, accuracy up to 100%. 

 

Features

  • This instrument can be directly used only by switching on the power switch 
  • Safety and reliability 
  • Applicable voltage level 
  • Wide range of application 
  • The receiver has its own battery, no external power supply 
  • Continuously searches for point without affecting normal operation of the system 
  • It has strong anti-interference ability and overcomes the influence  
  • Intelligent charging management, reduce charging time and prolong battery life 

 

Technical Specifications   

Output Signal Generator Frequency  2.5 Hz 
Signal Generator No-load Output Voltage  ± 20 V ± 5% 
Signal Generator Voltage Amplitude Error  < 5% 
Signal Generator Short Circuit Output Current  ≤ 80 mA 
Output Generator Port Impact Resistance  400 V DC shock 
Power Supply Voltage  AC 220 V ± 10% 
Voltage Frequency  50 Hz ± 5% 
Input Insurance  2 A 
Maximum Power  3 W 
Sensitivity Of Signal Receiver Current Detection  0.5 mA 
Signal Generator Impedance  40 k Ω 
Signal Receiver Maximum Output Current  2.5 ma 
Receiver Display  Number 0 to 19 
A Jaw Size  Φ 1.96 in (50 mm) 
B Jaw Size   Φ 0.27 in × 0.35 in (7 mm x 9 mm) 
Detect The Maximum Grounding Resistance  300 KΩ 
Grounding Resistance Measurement Accuracy  0 KΩ to 4.5 KΩ Error ≤ 0.5 KΩ; 5 KΩ to 300 KΩ 
Error   ≤ 10% 
Signal Generator Volume  11.8 in × 10.6 in × 7.87 in (300 mm x 270 mm x 200 mm) 
Signal Receiver Volume  8.26 in × 3.93 in × 1.25 in (210 mm x 100 mm x 32 mm)Â