Description
Overview
GAOTek Hydrogen Cyanide gas detector is a portable device that can be used to detect a variety of gases, including flammable gases, toxic gases, and oxygen. It is equipped with an LCD dot matrix display that supports Chinese and English operation. The gas concentration unit can be quickly shifted between ppm and mg/m3. The detector also has an ultra-high buzzer alarm sound with settable higher and lower alarm values. Additionally, the detector has a data storage function that allows historical data to be viewed on the device or exported and printed by connecting to a computer.
Features
- Dot matrix display
- Ultra-high buzzer alarm sound
- Data storage function
- Historical data
- Higher and Lower alarm
Technical Specifications
| Measure Range | 0 ppm to 20 ppm, 0 ppm to 50 ppm, 0 ppm to 100 ppm, 0 ppm to 400 ppm, 0 ppm to 500 ppm, 0 ppm to 1000 ppm, 0 ppm to 2000 ppm, 0 ppm to 5000 ppm |
| Resolution | 0.01 ppm, 0.1 ppm, 1 ppm |
| Precision | 3% FS |
| Sampling Method | Diffusion (add external sampling pump if necessary) |
| Unit | ppm, mg/m3 |
| Display | Monochrome dot matrix 128 X 128 LCD graphic display |
| Backlight | Time of backlight is settable, auto on during alarms |
| Data Recording | Storage capacity of over one hundred thousand sets, 15 months with 5 min interval. Interval time ranges from 10 s to 3600 s are settable (optional function) |
| Data Transmission | High-speed data transmission via USB, data downloading and printing with necessary software (optional function) |
| Calibration | Two target point calibration, support automatic zero-point calibration of all channels by one click. Calibration is protected by password, resettable. Support restoration of factory calibration and parameter settings |
| Alarm Type | Sound and light, higher and lower alarm point values are settable. Three alarm statuses: ON/OFF/MUTE |
| Battery | 3.7 V rechargeable lithium battery, capacity of 1800 mAh. Working time: >50 h (no combustible gas), charging time: <6 h |
| Explosion-proof Grade | Exia II CT4 |
| Protection Grade | IP 66 |
| Working Temperature | -4 °F to 122 °F (-20 ℃ to 50 ℃) |
| Working Humidity | 0% RH to 95% RH (Non-condensing, a filter dryer is needed in environments with humidity >90% RH) |