Click to enlarge
Ion Meter for Ammonium Ion (Outdoor Applications)
Back to products
GAOTek Sound Level Meter Calibrator (ND9a, ND9b)

GAOTek Temperature, Humidity Hygrometer (Dew point, Wet bulb Temp)

This Temperature, Humidity Hygrometer (Dew point, Wet bulb Temp) is designed with the integrated measurement function in the range of Dew point temperature from -22 °F to 212 °F (-30 °C to +100 °C).

Add to quote
SKU: GT00X100ZZ Categories: , , ,
Description

Description

Overview

GAOTek Temperature, Humidity Hygrometer (Dew point, Wet bulb Temp) is designed with the integrated measurement function in the range of Dew point temperature from -22 °F to 212 °F (-30 °C to +100 °C).The integrated measurement function are ambient temperature, humidity, dew point and wet bulb temperature. It is a high precision and low power consumption digital temperature meter. It provides humidity sensors and industrial grade digital display. It is suitable for the temperature measurement and humidity measurement and can be used in Industries, laboratories, Engineering and professional use.

Key Features

  • High accuracy and performance
  • Microprocessor- based design
  • Dew point and web bulb temperature
  • Max/min data hold function
  • Dual display temperature and humidity
  • Backlight and auto power off.
  • Fast response time.
  • Digital display.

Technical Specifications

Temperature Range -22 °F to 212 °F (-30 °C to +100 °C)
Humidity Range 0 % to 100 % rh
Dew Point Temperature -22 °F to 212 °F (-30 °C to +100 °C)
Wet Bulb Temperature 32 °F to 176 °F (0 °C to 80 °C)
Humidity Accuracy ± 2 % rh (20 % to 80 % rh at 77 °F (+25 °C))

± 2.5 % rh (at other ranges)
Air Temperature Accuracy ± 0.5 °C / 0.9 °F (at 77 °F (25 °C)

± 0.8 °C / ± 1.5 °F (all other ranges)
Resolution 0.01 °C / 0.01 °F, 0.01 % rh
Response Time 10 seconds (90 % at 77 °F (+25 °C air))
Battery Type 9V 6F22 battery
Power Consumption 3 mA
Dimension 8.98 in × 2.17 in × 1.39 in (228 mm × 55 mm × 33 mm)
Weight 6.77 oz. (192 g)
Operating Humidity < 80 % rh
Storage Humidity < 80 % rh
Operating Temperature 32 °F to 104 °F (0 °C to 40 °C)
Storage Temperature 32 °F to 104 °F (-10 °C to 60 °C)

Additional Information

Panel Description:

  1. Humidity/Air Temp Probe: Humidity Sensor and Semiconductor Sensor built inside.
  2. LCD Display: 4 1/2 dual digit LCD display with units of degrees Celsius, Fahrenheit, % RH /dew point we built and low battery “BAT” MIN/MAX Hold, DATA Hold indication.
  3. MAX/MIN Button: Press MAX/MIN to enter MAX, MIN Recording mode. Select the proper range before selecting MAX MIN to ensure that the MAX/MIN reading will not exceed the testing range. Press once to select MIN. Press again to select MAX. Press and hold the button for over 2 seconds to turn off MAX, MIN recording.
  4. Fahrenheit, Celsius, Dew point, WBT: Press F, C, dew point, WBT button for desired measurement.
  5. Power ON/OFF Button: Turn the meter power ON/OFF.
  6. HOLD /Backlight Button
  • Press Hold/backlight Button to enter hold function. The reading will be held when Data Hold button is pressed.
  • Press Hold/backlight Button for over 2 seconds to turn on or off backlight function.
  1. Battery Compartment

Sensor Type: A single chip relative humidity and temperature multi sensor module comprising a calibrated digital output.

Accessories:

  • 9 V battery
  • User manual
  • Blister card.

HUMIDITY AND AIR TEMPERATURE MEASUREMENTS

  1. Hold the probe in the area to be tested and allow adequate time for readings to stabilize.
  2. Press °F, °C, dew point, WBT and select enter key and further select °F, °C, dew point Wet Bulb measurement.
  3. Read the Relative Humidity and Air Temperature, dew point temperature and wet bulb temperature.

NOTE:

Do not immerse the probe in liquid; it is intended for use in air only.

WARNING:

  • Don’t expose the sensor to direct sunlight.(insolation)
  • Don’t touch or manipulate the sensor

Battery Replacement

When the low battery symbol appears on the display, replace the meter’s battery (9V). The battery compartment is located behind the panel that surrounds the meter’s trigger. Open the compartment, replace the 9V battery and close the battery compartment cover

Over-range Indication

If the temperature measurement exceeds the specified temperature range, the thermometer will display dashes in place of a temperature reading.

To override Auto Power Off function (Non-Sleep Mode):

Press the hold/backlight button and press the power button now the full display appears, release both the buttons. Power Icon will not show on the LCD. The unit will not auto power off now.

Over-range Indication

If the temperature measurement exceeds the specified temperature range, the thermometer will display dashes in place of a temperature reading.