Description
Technical Specifications
Controller Measurement Variables | Dissolved oxygen, saturation, oxygen partial pressure |
Controller Measuring Range | 0 mg/L to 20 mg/L, 0% to 200%, 0 hPa to 400 hPa |
Controller Resolution | 0.01 mg/L, 0.1 %, 1 hPa |
Controller Accuracy | ±1.5 % FS |
Controller Repetition | ±0.5 % FS |
Controller Output Type | 4 mA to 20 mA current transmission output |
Controller Max. Loop Resistance | 750 Ω |
Controller Accuracy | 0.1% FS |
Controller Output Type | RS485 digital signal output |
Controller Communication Protocol | Standard MODBUS-RTU (customizable) |
Controller Power Supply | AC220 V ±10%, 50 Hz/60 Hz (optional 24 V ±10%) |
Controller Alarm Relay | AC 250 V, 3 A |
Sensor Ultra-resistant To Pressure | (0.6 Mpa) wallop, imported (grit mesh metal membrane) |
Sensor Up Thread | M32 x 2 |
Sensor Measuring Range | 0 mg/L to 20 mg/L |
Sensor Measuring Principle | Current type sensor (polarographic electrode) |
Sensor Breathable Membrane Thickness | 100 μm |
Sensor Electrode Shell Material | PVC or 316 L stainless steel |
Sensor Life | >2 years |
Sensor Cable Length | 5 m |
Sensor Measurement Limit | 40 mg/L |
Sensor Polarization Time | 60 min |
Sensor Minimum Flow Rate | 2.5 cm/s |
Sensor Drift | <2% / month |
Sensor Measurement Error | <±0.01 mg/L |
Sensor Output Current | 50 nA to 80 nA /0.1 mg/L Note: Maximum current 3.5 uA |
Sensor Polarization Voltage | 0.7 V |
Sensor Zero Oxygen | <0.01 mg/L |
Sensor Calibration Interval | >60 days |
Sensor Detection Limit | 0.01 mg/L, 68 °F (20 ℃) |
Sensor Response Time | 2 min 90%, 68 °F (20 ℃) |
Temperature Compensation Resistance | Pt 100, Pt 1000, 22 K, 2.252 K, etc. |
Sensor Measured Water Temperature | 32 °F to 140 °F (0 ℃ to 60 ℃) |
Controller Temperature Measurement Type | NTC 10 K / PT 1000 |
Controller Temperature Measuring Range | 14 °F to 140 °F (-10 ℃ to 60 ℃) |
Controller Temperature Resolution | 32.18 °F (0.1 ℃) |
Controller Temperature Accuracy | ±32.9 °F (±0.5 ℃) |