Description
Overview
The GAOTek Long Range Visual Fault Locator serves the purpose of fiber identification and faults locating in single-mode or multi-mode fiber. The device operates in a long range with stable power output. It is a helpful assistant to the dead zone of OTDR and is also a basic maintenance tool for fiber networks, LAN, ATM fiber systems, and telecom network systems. The use of effective laser drive circuit ensures that it can work for long hours continuously, providing stable power output in low battery.
Key Features
- Supports both CW and 2 Hz modulation work mode
- Use of special laser end design to avoid damage when dropping on the floor
- Long working hours: use of effective laser drive circuit ensures that 1 mW/650 nm locator can work for more than 40 hours continuously
- Stable power output: use of special laser driver circuit ensures stable power output in the low battery
- 2.5 mm universal adapter: uses 2.5 mm universal adapter, can match SC/LC adapters
Technical Specifications
Wavelength | 650 nm ±10 nm |
Light source | FP-LD laser |
Output power | 1 mW, 3 mW, 10 mW, 20 mW (optional) |
Approx. Test Range | 3 km (1 mw), 5 km (3 mw), 10 km (10 mw), 15 km (20 mw) |
Connector | 2.5 mm universal adapter
1.25 mm connector optional |
Working mode | CW or 2 Hz modulation |
Operating temperature | 32 °F~104 °F (0 °C~40 °C) |
Storage temperature | -13 °F~158 °F (-25 °C~70 °C) |
Power | 2 pcs AA battery |
Working Hours | ≥ 40 (1 mW) |
Size | Φ: 30 L: 7.28 in (185 mm) |
Weight | 0.22 lbs (100 g) (excluding batteries) |
Additional Information
Applications
This Visual Fault Locator with Long Range (Stable Power Output) can be used in:
- Finding fiber fracture and bending fault location
- Test Lab of optical fibers
- End to end fiber identification
- Maintenance of telecom system
- CATV system to trace fiber loss testing
- Fiber routing and continuity checking in optical networks
- Optical examination and fault locating for both single mode and multimode optical fibers
 Standard Accessories