Industrial Tablet PC with G Acceleration Sensor (NFC)

Accessories:

Network Connections:

Interface Configuration:

Key Layout:

① Scanning: scanning button

② Power Button: To start or to close the touch screen panel also used for the computer to       sleep or wakeup from hibernation mode.

③ Voice sound -/ ④voice sound +: reduce or increase the volume

⑤ One dimensional code scanner/Two dimensional code scanner: To support one/two-          dimensional scanning

⑥ Earphone Jack: The jack supports the audio signal to a loudspeaker or headset.

⑦ HDMI interface: High definition multimedia, Interface, high definition multimedia interface.

⑧ USB Port: Full size USB

⑨ USB Port: Micro USB

⑩ Charging Interface: charging the tablet via DC adapter

⑪ Front camera: camera, video

⑫ SIM card slot: Support WCDMA 3G mini3G

⑬ TF card slot: Support TF card

⑭ Rear camera: camera, video

⑮ Speaker: Built-in speaker to hear the sound without additional link equipment.

⑯ The docking interface: To support docking station.

Introduction to Desktop:

1. Windows 10 start image:

On the start screen there is many icons displayed as shown the figure.

The icons are application programs displayed in the form of magnet. Click the icon and view each application. Setup the Microsoft account and login to the account before the application program runs.

         2. Image slide applications:

Slide to the right from the left side of the screen to scan the application program.

Slide to the left from the right side of the screen to set the charm menu column.

In start screen slide from the top of the screen to view the application programs.

In start screen, slide finger up and down to move the image.

        3. Introduction to app interface:

Besides the application programs displayed on the start screen, we can also start other application programs such as software application programs installed in the Tablet PC.

To display more applications on the start interface as shown in the figure,

• Click the properties icon
• Press and hold the program magnet for about one second and then let move
• Click the pin to start.

To cancel or delete application in the start screen touch, press and hold the application program magnet for about one second and delete it or cancel, then run and select program.

       4. Charm menu column:

Slide it to the left from the right side of the screen to start Charm menu column, including: Start, Device, Setup, Share, and Search Program.

To Sleep/Shut down/Restart the Tablet PC

To search the files and application programs in the Tablet PC.

To set up the Tablet PC

To scan more apps

      5. Multitasking operating Interface:

Slide it from the left side of the screen, we can able to view the running applications. If we want to enter the application click it or to delete the application delete it.

Basic Operations:

1 Sleep, restart and power off:

Windows operating instructions of special function module:

1) U-block GPS:

1. U-block GPS:
2. Copy U-block test tool to desktop.
3. Use power control tool and click the power on.
4. Open the software choose the receiver, port and click COM1.
5. For receiver choose the baud rate as 9600
6. As shown in the below window click the satellites model picture to enlarge

7. The blue colors are the satellite that is searched, green color are effective satellites. Numbers in the right are signal value.

Standard:

Environment: Open field with no metal around and no obstacles. Sunny weather without clouds covering the sky.

Condition: Can view satellites above 12 pieces. Effective satellites above 10 pieces. If the value reaches above 40 dB only 2 to 3 pieces can be viewed.

2. 1D Module Operation:

1. Copy the serial assistant (SPU) on the desktop.
2. Use power control tool and click the Power On button

3. Install the software, choose corresponding serial port and baud rate choose 9600

4. Click the start key and then press the scanner key on the PAD to start scanning

5. After successful scanning the result will be shown on the frame automatically

3. 2D module Operation:

1. Use power control tool and click the Power On button
2. Open the text document, click the blank space, press the scan key on the PAD and start scanning
3. The result of the scanner will be shown on the frame automatically

Android operating instructions of special function module:

1) NFC Module Operation:

• Copy NFC testing software.
• Click the software and open
• Keep the NFC card on the induction area
• Read the information and click OK!
  

2) GPS Module Operation:

• Copy GPS testing software
• Click install and open the software
• The GPS status display on the top left corner
• Click and enter into set interface.
• In open field wait for one minute and check if there is satellite
• If the satellite image captured, wait for three minutes to get the value and verify the value meets the standard

3) 1D Module Operation:

• Copy the scan code testing software
• Click install and open the software
• Choose the USB on the serial port node, and baud rate as 9600 or 115200.
• Click serial port operation and scan the key on pad to scan relevant barcode.
• After successful scanning the characters displayed automatically on the frame

4) 2D Module Operation:

• Copy the scan code testing software
• Click install and open the software
• Click the frame and press the scan key aiming to the barcode and start scanning.
• After successful scanning the characters displayed automatically on the frame
• Press the scanner key to scan directly as shown below

• If scanner is not working scan using USB switch code.

USB device type