Description
Overview
GAOTek Benchtop Conductivity Water Quality Tester is a High-performance benchtop Conductivity/TDS meter, 1 point to 3 points calibration, selectable TDS conversion factor, setup menu contains 7 optional parameters.
Features
- Lab-ready benchtop meter excels in conductivity/TDS measurement
- Easy 1 point to 3 point calibration with auto-calibration solution recognition
- Customize cell constant, temp. coefficient, and TDS conversion
- Precise readings with Auto Temperature Compensation across range
- Auto-Hold locks measurement endpoint, enhancing accuracy
- Set 7 parameters, calibration points, temperature, auto-power, etc., in menu
- Reset restores factory settings. Powerful, versatile lab tool.
Technical Specifications
| Conductivity | Range: 0.003937 µS/in to 787.4 µS/in (0.01 µS/cm to 2000 µS/cm), 0.003937 mS/in to 78.74 mS/in (0.01 mS/cm to 200.0 mS/cm)Accuracy: ±1% F.S
Resolution: 0.001, 0.01, 0.1, 1 Calibration Points: 1 point to 3 points Calibration Solutions: 3.937 µS/in (10 µS/cm), 84 µS/cm (33.071 µS/in), 556.299 µS/in (1413 µS/cm), 5.078 mS/in (12.88 mS/cm), 43.976 mS/in (111.8 mS/cm) |
| TDS | TDS Factor: 0.1 to 1.0 (Default 0.5)Range: 0 ppm to 10.00 ppm, 100.0 ppm, 1000 ppm, 10.00 ppt, 100.0 ppt (Max. 200ppt)
Accuracy: ±1% F.S Resolution: 0.01, 0.1, 1 |
| Temperature | Range: 32 °F to 221 °F (0 °C to 105 °C)Calibration Range: Measured value ±50 °F (10 °C)
Accuracy: ± 32.9 °F (0.5 °C) Resolution: 0.1 °F (0.1 °C) Calibration Points: 1 point |
| General | Temperature Compensation: 32 °F to 212 °F (0 °C to 100 °C), Manual or AutomaticTemperature Coefficient: 0.0%/°F to 5.556%/°F (0.0%/°C to 10.0%/°C), linear
Cell Constant: 0.1, 1, 10 Data Hold: Manual or Auto-Endpoint Reference Temperature: 77 °F (25 °C) Connector: 6-pin mini plug Display: LCD Power: DC9V, using AC adapters, 220 VAC/ 50 Hz Weight: 3.31 lb (1500 g) Dimensions: 8.27 in x 8.07 in x 2.95 in (210 mm × 205 mm × 75 mm) |
Reviews
There are no reviews yet.