ID: GAO-FBC-104This ADSS Fiber Optic Outdoor Self-supporting Aerial Cable is designed for easy and economical installation in campus backbones or LANs with self-supporting installations where metallic messengers cannot be used.
ID: GAO-FBC-107This ADSS Optical Fiber Cable PVC Outer Jacket is designed with single mode fiber optic cable which has diameter 0.43 in (11.0 mm) and fiber count as 48.
ID: GAO-FRC-101This Armored Fiber Optic Patch Cord can be used with both single and multi-mode fiber, providing 10G fiber transmission used in the field of communication.
ID: GAO-FRC-104This Armored Polarization Maintaining (PM) Patch Cord is built with polarization maintaining panda fiber and connected using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
ID: GAO-FUC-102This Bend Insensitive Fiber Optic Patch Cable has a single mode and multimode patch cable with 0.079 in (2.0 mm) cable, SC-LC connector type and used for telecommunication.
ID: GAO-FTPC-101This Distribution Tight Buffer Optical Cable SM/MM 4-24 Fiber contains several tight-buffered fibers bundled under the same jacket and with fiberglass rod reinforcement to stiffen the cables and prevent damage.
ID: GAO-FPG-104This Fiber Optic Armoured Pigtail is designed using stainless steel tube with mini armored protection which supports single mode and multimode fiber.
ID: GAO-FBC-103This Fiber Optic Cable Non-armoured Loose Tube Cable are designed to provide high fiber counts with flexibility required for most demanding installations and can be used in both indoor and outdoor.
ID: GAO-FBC-106This Fiber Optic Cable Plenum Rated Indoor/Outdoor is used in fiber optic cabling installation with pulling eye in the ends and plenum rated jacket material.
ID: GAO-FPG-102This Fiber Optic Fan out Pigtail is used with single mode and multimode fiber which provides heat shrinkable tube and Low insertion loss.
ID: GAO-FBC-102This Fiber Optic FTTH Drop Cable LSZH Jacket is designed to be used for connections between the dome closure, small dwelling unit/warehouse and independent homes which is made up of FRP (Fiber Reinforced Plastics), steel wire and a LSZH outer jacket.
ID: GAO-FBC-101This Fiber Optic PDLC Patch Cord, Waterproof Outdoor Patch Cable is designed with metal protective devices and standard size for Duplex LC connectors which can be used for 3G/4G network communications.
ID: GAO-FPG-101This Fiber Optic Pigtail 900 μm Buffered Fiber is used with Single mode and multimode fiber for field fusion splice during installation.
ID: GAO-FTPC-102This Fiber Optic Pre-terminated Cable MM/SM for Indoor/Outdoor are superior full-line fiber optic cables that can be used in large data centers or typical LAN offices or in campus-wide networks to reduce time in deployment and to improve project investments.
ID: GAO-FPC-101This Fiber Patch Cable SM/MM is designed with low insertion loss and high return loss which can be used in high vibration environments.
ID: GAO-FRC-102This IP67 Waterproof Fiber Optic Patch Cord has a strong LSZH jacket and armored structure which can resist high temperature and is suitable to use in harsh environments.
ID: GAO-FUC-101GAOTek LC Duplex Switchable Uniboot Fiber Optic Patch Cable with 10 G fiber transmission and can be used in single mode and multimode fiber.
ID: GAO-FUC-103This LC Uniboot Reversible OM3 Jumper Zip Cord Assembly is designed to withstand tight bends and challenging cable routes and can be used with single mode and multimode fiber.
ID: GAO-FMTC-102This MTP/MPO to LC Breakout Cable with Push Pull Tab is designed with 12, 24 fibers and can be used in high-density backplane and Printed Circuit Board (PCB) applications in data and telecommunications system.
ID: GAO-FMTC-101This MTP/MPO Trunk Cable (Riser, Plenum, and LSZH) is designed for high density applications to rapid installation and space savings from 12 to 144 fiber counts.
ID: GAO-FBC-105This Ribbon Outdoor Fiber Cable Pre-terminated are convenient, cost-effective and fast installed solutions that come with pre-terminated adapters or connectors and used in single or multimode fiber patch cables and pigtails.
ID: GAO-FRC-103This ST/PC ST/UPC ST/APC Simplex Duplex Single mode Multimode Fiber Optic Patch Cord is designed with high performance hybrid or single type connector and used for network applications.