Showing 49–72 of 141 results

Show sidebar
Show 12 24 36 All

GAOTek Hart Communication Meter

SKU: GAOTek-SLM-138
This Hart Communication Meter has working temperature of -40 °F to 158 °F, working pressure of -2.90 PSI to 14.50 PSI, ultrasonic frequency of 60 kHz.
Add to quote
Quick view

GAOTek High Accuracy Ultrasonic Level Meter

SKU: GAOTek-SLM-141
GAOTek high accuracy ultrasonic level meter gauge uses the time required after the transmitted ultrasonic wave passes through the material level or liquid level to reflect to calculate the distance.
Add to quote
Quick view

GAOTek High frequency radar level transmitter

SKU: GAOTek-SLM-106
GAOTek High frequency radar level transmitter is a high frequency microwave pulse type radar level gauge.
Add to quote
Quick view

GAOTek High Frequency Radar Water Level Sensor

SKU: GAOTek-SLM-101
This Water Level Sensor has measure liquid levels up to 32.80 ft accurately. 24 V DC powered, -40 °F to 248 °F. OEM / ODM available.
Add to quote
Quick view

GAOTek High Precision Cable Fault Locator

SKU: GAOTek-CFL-117
GAOTek high precision cable fault locators are designed for ease of use.
Add to quote
Quick view

GAOTek High Precision Detector Underground Cable Fault

SKU: GAOTek – CFL - 122
GAOTek high precision detector underground cable fault can test all kinds of faults, especially on the Flashover and High Resistance fault testing and without burning through.
Add to quote
Quick view

GAOTek High Temperature Waste Radar Level Transmitter

SKU: GAOTek-SLM-102
GAOTek High Temperature Waste Radar Level Transmitter have a radar level meter antenna by narrow microwave pulse, the pulse propagation in space at the speed of light, meet the measured medium surface, the part of the energy to be reflected, by the same antenna.
Add to quote
Quick view

GAOTek High Voltage Cable Fault Locator

SKU: GAOTek-CFL-113
This High Voltage Cable Fault locator has 80 Hz to 1500 Hz bandwidth, 80 dB signal, 6700 mAh battery, AC 100 V to 240 V input, and 5 V or 2 A output.
Add to quote
Quick view

GAOTek High Voltage Power Cable Fault Pre Locator

SKU: GAOTek-CFL-142
GAOTek High Voltage Power Cable Fault Pre locator is used independently; In impulse current mode (ICM), it needs to be used with KHV 32 high voltage signal generator; In the multiple impulse mode (MIM) must also be tested with TDR 11 cable multiple impulse filter coordination.
Add to quote
Quick view

GAOTek Intelligent Multi-Pulse Cable Fault Tester

SKU: GAOTek-PELA-262
GAOTek intelligent multi-pulse cable fault tester adopts present international advanced “multi-times pulse” technology, self-developed test technology and the device for high- frequency and high- voltage data signal.
Add to quote
Quick view

GAOTek Intelligent Ultrasonic Level Meter

SKU: GAOTek-SLM-111
GAOTek Intelligent Ultrasonic Level Meter can be used to measure the liquid level of various liquids and the height of solid materials, and it can also be used to measure distances.
Add to quote
Quick view

GAOTek Live Cable Identifier

SKU: GAOTek-PELA-252
GAOTek live cable identifier is a handheld device with a 3.5 in (8.89 cm) color LCD screen and a built-in high-speed microprocessor, which can recognize and decode the pulse coded current signal of the transmitter.
Add to quote
Quick view

GAOTek Multi Wire Cable Tester Fiber

SKU: GAOTek-CFL-105
GAOTek multi wire cable tester fiber is an intelligent product, which is designed for polarity judgment and on-off analysis in MPO or MTP cable production.
Add to quote
Quick view

GAOTek Multi-Purpose Precision Locator Cable Fault

SKU: GAOTek – CFL - 123
GAOTek multi-purpose precision locator cable fault is specially designed to detect pipes, sondes, telecommunication lines buried utilities.
Add to quote
Quick view

GAOTek Noise Level Meter

SKU: GAOTek-SLM-237
This Noise Level Meter has a storage temperature of 32 °F to 104 °F, an operating temperature of 14 °F to 140 °F, and an accuracy of 1.5 dB.
Add to quote
Quick view

GAOTek Optic Cable Obstacle Detector Test

SKU: GAOTek-CFL-216
This Optic Cable Obstacle Detector Test has 4.92 ft (1.5 m) event dead zone, 16.4 ft (5 m) attenuation dead zone, and FC or UPC customize connector.
Add to quote
Quick view

GAOTek Optical Fiber Ranger Cable Fault Locator

SKU: GAOTek-CFL-110
GAOTek optical fiber ranger cable fault locators are designed fiber optic tester, they aim at fiber network installation, fiber network engineering acceptance and fiber network maintenance.
Add to quote
Quick view

GAOTek Optical Power Meter Visual Fault Locator Network Cable Test

SKU: GAOTek-CFL- 118
GAOTek optical power meter visual fault locator network cable tester mainly used for measurement of optical signal power, stable light source output, insertion loss test, etc.
Add to quote
Quick view

GAOTek Outstanding Professional Meter Instrument

SKU: GAOTek-SLM-110
This Outstanding Professional Meter Instrument offers  industrial grade quality with customized support. Perfect for industrial usage. Buy now!
Add to quote
Quick view

GAOTek Overground Cable Fault Locator

SKU: GAOTek-PELA-246
GAOTek overground cable fault locator Widely used in cable manufacturers, mines, electric power departments, large enterprises and power cable construction and maintenance departments.
Add to quote
Quick view

GAOTek Palm Oil Sensor Meter

SKU: GAOTek-SLM-139
GAOTek palm oil sensor meter ultrasonic level can display liquid level, distance, echo waveform, and historical curve.
Add to quote
Quick view

GAOTek Pin Pointer Cable Fault Locator

SKU: GAOTek-CFL-107
GAOTek pin pointer cable fault locator has an extreme complexity of the power cable laying environment, pinpointing points has always been a critical step in cable fault testing.
Add to quote
Quick view

GAOTek Pipe and Cable Route Tracer Cable Fault Locator

SKU: GAOTek-CFL-124
GAOTek Pipe and Cable Route Tracer Cable Fault Locator consists a transmitter and a receiver, can be used to do route tracing, pipe exploration and depth measurement of the underground cables and metallic pipes.
Add to quote
Quick view

GAOTek Pipeline and Optical Cable Fault Locator

SKU: GAOTek-CFL-115
GAOTek Pipeline and Optical Cable Fault Locator. This Pipeline and Optical Cable Fault Locator has current signal of maximum 150 mA, signal frequency of 512 Hz to 33 kHz, and 9.32 mi test distance.
Add to quote
Quick view
Load more products
Loading...