Turbidimeters

GAOTek Turbidity measurement portable turbidimeter has a Control interface with two groups of ON/OFF relay contacts, divided into high and low alarm photoelectric isolation output

GAOTek Portable handheld turbidimeter Uses the Nephelometric principle with 90° detection.

This water quality tester turbidimeter has a PH range is  0.00 to 14.00 PH, ORP of 1.24 mi to 1.24 mi, and electrical conductivity of 1 to 100ms/cm.

GAOTek multifunction LCD portable turbidimeter It adopts a 3-inch color LCD with intuitive GUI graphic navigation and membrane button panel design.

This LED turbidimeter has power supply 220 V 50 Hz, measurement range is 0 to 20 mg/L, and accuracy is 0.2% FS.

GAOTek high performance portable turbidity Sensor adopts 90°scattering light principle, RS485 and standard Modbus, with a good advantage of wide range, self-cleaning and free maintenance; It can be used to measure turbidity value of backwash water in filter tank, raw water and sedimentation tank in waterworks, monitoring the water quality in industrial production and regular water monitoring for surface water, groundwater and pipe network.

This LED light source turbidity meter has minimum readout of 0.01, measuring range of 5 to 100, 100 to 1000, and basic error ±5% FS.

This portable turbidity meter has measuring range 0 to 10000 mg/L, accuracy of 2.0 %(FS), and power supply of DC 12 V.

This portable turbidity meter has a measuring range of up to (0 to 20.00) NTU, resolution of 0.01 NTU, 0.1 NTU, 1 NTU, and accuracy ≤±8%.

This salinity turbidity sensor has a measuring range of ±1000.0 mV (0.00 to 14.00) pH, EC range is 0 to 10 mS/cm, and temperature range is 0 to 60 °F.

This portable digital turbidimeter has a measuring range of 0 to 200 NTU, accuracy is 0.1 NTU, and intrinsic error of ±2.5% FS.

GAOTek Electronic concentration potable turbidimeter series Intelligent turbidimeter using light scattering principle, the calibration solution using formazan standard solution commonly used internationally.