Description
Overview
This UHF RFID reader is built around the award winning, high performance M5e UHF RFID reader module. It utilizes a local personal computer (not included) to provide command and control via its RS-232 serial interface. This RFID reader meets the harsh environments operating standards required for use in trucks and automobiles. It is ideal for deployment in a wide variety of indoor and outdoor applications.
Technical Specifications
| Ordering Information | |
| Reader | SR-5E, SR-5E-EU |
| Development kit | SR-5E-DEVKIT, SR-5E-EU-DEVKIT |
| Tag/Transponder Protocols | |
| RFID protocol support | EPC global Gen 2 (ISO 186000-6C) with anti-collision, DRM and advanced anti-jamming |
| Regional support | Certification obtained, or in process for the following regions: North and South America, EU, Korea and other Asia-PAC countries |
| RF interface | |
| Antenna connector | Three reverse-TNC antenna ports supporting monostatic 50Ohm antenna (for best performance VSWR should be less than 1.5 : 1 in operating frequency range) |
| RF power output | Separate read and write levels, command adjustable from 5dBm to 30 dBm (1 W), ±1.0 dBm accuracy |
| Data/control interface | |
| Data/control | 9-pin serial connector, supporting RS232 with asynchronous data rates up to 921.6kbps. DTR signal turns off reader completely to conserve power |
| GPIO sensors and controls | 2 General purpose inputs and one output, accessible via Molex connector |
| Protocol | Command-response protocol protected by length field and 16-bit CRC |
| Power | |
| AC/DC power required | Reader alone: 10 to 16 V DC, 8 W maximum at 12 V when transmitting; reader with AC power adapter: 100 to 240 V DC, 50 to 60 Hz,10w maximum when transmitting |
| Idle power consumption | 1.7w max. at idle (power management modes can be used to reduce this to as little as 0.1w) |
| Environments | |
| Operating temp | Reader: -40 °C to 75 °C; AC power adapter: 0 °C to 40 °C |
| Storage temp | Reader: -40 °C to 85 °C; AC power adapter: -10 °C to 70 °C |
| Environmental standards | Confirmed to meet in-vehicle standards for: powered thermal cycle; thermal shock resistance A and B; powered vibration endurance mechanical shock; humidity-temperature cycle water/fluids ingress connector/ harness pull-push voltage overstress electrostatic discharge |
| Architecture | |
| RFID ASIC | Indy R1000 |
| User-accessible flash memory | 16 KB |
| Tag buffer | 200 tags |
| Performance | |
| Tag read rate | Up to 190 tags/second |
| Tag read distance | Over 30 ft (9 m) with 6dB antenna (36 dBm EIRP) |
| Physical | |
| Dimensions | 21.6 cm (L) × 13.3 cm (W) × 3.8 cm (H) |
Reviews
There are no reviews yet.